G Drive not recognized (Win 8)

User
Posts: 1
Joined: May 9th, '13, 10:01

G Drive not recognized (Win 8)

Postby Steve Steelz » May 9th, '13, 10:30

I purchased a Sony Vaio and G drive 2T for music production. The drive is not being recognized on my new comp (win 8) or my old one (Win xp pro). It says on the box it is formatted for mac but the people at best buy said it should be fine on pc. I'm guessing I need to format the drive? I followed all the instructions to resolved it in disk management but none of the options are available when I right click on the drive. Any tips?

Moderator
User avatar
Posts: 480
Joined: Feb 6th, '13, 10:44

Re: G Drive not recognized (Win 8)

Postby Dustin F » May 14th, '13, 07:04

Hi Steve,

Thanks for posting. The Mac partition is protected and needs to be cleaned so it can be re-initialized and formatted. Here are some instructions to help you.

To format the drive from MAC to Windows format you must first find out the disk number associated with the drive.
• To do this press (Windows key + R) this will bring up the run window.
• Type (cmd) into the box and click ok.
• This will open the command promt a black box with white text
• Type (diskpart) into the command prompt and hit enter
• Type (list disk) and hit enter. This will give you a list of the hard drives on the computer arranged by number and will list the capacity (the amount of data the drive can hold). The drive will usually be the last in the list. Check the capacity to verify. The G-Drive will always be a number higher than 0.
• Once you have the disk number type (select disk “x”) (substitute x for the drive number i.e. 1, 2, 3) command prompt will then say disk “x” is selected disk
• Type (clean) once you get a message saying the drive has finished cleaning you can close the window.
• Open disk management in most versions of windows click the start button place the mouse pointer over “Computer” or “My Computer” and right click. Then click manage. For Windows 8 press ( + x) then click “Disk Management”
• The computer management window will open, click “disk management” in the left column.
• Look for the disk number listed in the lower half of the window (you may want to maximize the window in order to see all drives easier.) The area next to the disk number should be black. Right click on the box with the drive number and click “initialize” If asked to select “MBR or “GPT” for partition style select “GPT” this message may appear after the next step instead if you are on XP
• Next right click on the black box to the right labeled “unallocated space” click “New Simple Volume” or “New Partition” (depending on your version of windows)
• A wizard window will open, click next select “Primary Partition” if asked (XP users) the maximum amount of space will be selected by default so just click next.
• It will say “Assign a drive letter or path” the default drive letter is fine, click next
• NTFS is the format you want and leave the default allocation unit size as is. Where is says “New Volume” you may type a name for the drive that will be familiar to you. Recommended is the product name (i.e. g-drive, g-raid, g-drive mini) Check the “Perform a quick format” box and click next
• Click “Finish” the drive will take a moment to format, once the partition is listed as “Healthy” in disk management the drive will be ready to use and can be found in computer.
Regards

Dustin
G-Technology Support
twitter.com/GTech_Support

Return to G-DRIVE



cron
Fatal: Not able to open ./cache/data_global.php