- Power Button
Press the Power button on the device to turn the G-CONNECT 'On' or 'Off'. The Power/HDD light will begin to flash as the Wi-Fi light and Status light will blink when the device is turned on. The Power/HDD light will blink periodically through your work session.
When turning the device 'Off' you will see the Power/HDD light brighten and then the Status light will blink rapidly, followed by all lights shutting off.
- Wi-Fi Button
The Wi-Fi button is used to enable/disable Wi-Fi and to the device.
In the case that you need to perform a factory reset on your G-CONNECT press and hold this button until the LED's on the front of the device begins to oscillate.
- Power Port
Connect the device to the power adapter to enable wireless access.
- USB Port
On the rear of the device is a USB 2.0 port and Ethernet port. Use the USB port when you mount the device on a laptop or desktop computer.
- Ethernet Port
Use the Ethernet port to connect G-CONNECT to your local Internet router, and use the device as a private Wi-Fi hotspot for wireless devices.