CompanyLogo
Search Advanced Search
Categories
General Questions (53)
Studio Series (20)
Evolution Series (27)
G-DRIVE Family (41)
G-RAID Family (51)
G-SPEED/G-SAFE Family (52)
G-CONNECT (53)
G-MINI (16)
G-SATA (15)
Search
Advanced Search
FAQs
Search our FAQ to find resolutions to common issues.
Copying Content to G-CONNECT

Copying Content to G-CONNECT

G-CONNECT can be accessed in several ways. Depending on your needs and location, you can use one or all of the following methods to upload content to your G-CONNECT.

Copy Content in USB Mode

For large amounts of content we recommend using the G–CONNECT as a USB drive.

First you will need to power off the G-CONNECT by pressing the power button found on the device until the LED's begin flashing. When the LED's turn off, it is safe to disconnect the power adapter. Plug the two identical ends of the Y-Cable into your personal computer and the third into your G-CONNECT.

Your G-CONNECT should now appear as a drive on your Desktop if using Mac OS X and in Computer if using Windows.

To learn more about connecting to G-CONNECT as a USB drive, please visit How to add files using USB *for additional information.

For other ways to add content to your G-CONNECT device, please visit:


Print  Email  Save  Notify Me  Delete from Favorites 
Article ID: 96 Article Created: 07-22-2013 14:12 PMLast Modified: 07-22-2013 14:12 PM

How well did this article answer your question? 100% 75% 50% 25% 0%

Most Recently Viewed Articles
How to Connect as a Wireless Network Drive on Windows 7
As a wireless drive you can access and mange your G-CONNECT and it's content via the G-CONNECT's wireless connection. Select your G-CONNECT wireless network (SSID) through your wireless network manager....
How many drives can I chain together using FW800?
  For best performance we recommend a chain of no longer than 5 drives. ...
How many TB of storage will I have available using RAID 0/RAID 5 in my G-SPEED Q?
   ...
Why is there a USB Y-Cable?
There are some situations in which a USB port on your computer may be unable to provide enough power to the G-CONNECT....
Can I use any USB cable with my G-Technology Drive?
 We recommend using only the included USB cable with your drive....
How do I setup my drive for use as a Time Machine backup?
In most cases when a new drive is connected to the system Time Machine will prompt you for the setup. If this does not   happen or if you are... ...
Difficulties transferring files 30GB or greater with the G-DRIVE and G-SPEED
G-Technology places a high value on the quality of our products and we want our customers to always expect that our products meet your expectations.  Recently, it has come to our attention ...
On Windows I can't initialize my G-Technology hard drive. Disk Management says it is a "GPT Protective Partition."
On a Windows system drives show up as a "GPT protective partition" and are unable to be formatted. REASON: G-Technology drives are formatted at the factory for Mac OS.  Changes to the Mac OS in 10.5 and above have caused an incompatibility with Windows OS, requiring the drive to be "cleaned" before being formatted.  The process to "clean" the drive outlined in this article. ...
How do I change the RAID settings on my G-RAID mini?
  To change the RAID setting on your G-RAID mini you will need the G-RAID mini RAID Configurator. ...
Safely Ejecting Your G-Technology Drive
 How to properly eject your drive before disconnecting or powering off....