CompanyLogo
Search Advanced Search
Categories
General Questions (53)
Studio Series (20)
Evolution Series (27)
G-DRIVE Family (41)
G-RAID Family (51)
G-SPEED/G-SAFE Family (52)
G-CONNECT (53)
G-MINI (16)
G-SATA (15)
Search
Advanced Search
FAQs
Search our FAQ to find resolutions to common issues.
How to set up a RAID 0?

To create a RAID 0 set, open the Disk Utility program. This application is located on your hard drive under Applications/Utilities/Disk Utility.

1. The Disk Utility window will appear. Your G-DOCK will be displayed in the left-hand column. Information about the drive displays at the bottom of the window.

2. Select G-DRIVE ev by clicking its icon in the left-side column. You want to choose the volume icon, not the disk icon. The volume is a partition that the Mac OS recognizes.

3. Select the RAID tab to view the RAID options.

4. In the RAID Set Name field, name the drive. Make that name relevant to the content that it's holding. For instance, you could name it by the project and add a date.

5. From the RAID Type menu, choose Striped Raid Set.

6. To create the RAID set, from the left-side column, drag the two volume icons into the empty list area. You will now see "disk1" and "disk2" in that list.

7. Note that the estimated size goes from 1 TB to 2 TB of capacity. The storage is doubled under RAID 0 because you're using the total capacity of the two drives.

8. Click the Create button in the lower right corner of the window. A dialog box will appear asking if you want to erase the G-DOCK partition.

WARNING: THIS NEXT STEP WILL ERASE ALL DATA ON YOUR DRIVE.

9. Click the Create button to continue. A progress bar in the lower right corner of the window will show the progress of the disk's reformatting.

10. On your computer desktop, you will now see one drive icon. This represents the RAID 0 volume, and indicates the paired mode of your two G-DOCK ev cartridges.

11. The Disk Utility window will show the results. There are two 1 TB drives that are paired as "RAID slices." Their total capacity is listed as 2 TB.

12. Quit the Disk Utility program.

 


Print  Email  Save  Notify Me  Delete from Favorites 
Article ID: 82 Article Created: 06-25-2013 15:32 PMLast Modified: 06-25-2013 15:43 PM

How well did this article answer your question? 100% 75% 50% 25% 0%

Most Recently Viewed Articles
Can I use 3rd party hard drives in my GSafe/GSpeed units?
   ...
How do I restore the look of my drive icon after I've formatted my G-Technology drive on the Mac?
 Follow these instructions to restore the look of your G-Technology drive icons after formatting on Mac....
My G-RAID 2 Power Supply is making noise
My power supply is hissing or the power light is blinking....
What RAID settings does G-RAID ship in?
The G-RAID ships in a RAID 0 (Stripe) configuration allowing for increased performance....
Troubleshooting RocketRaid-based G-SPEED Setup Tips
This article contains information on how ot trouble shoot RocketRaid-based G-SPEED Setups....
Quick Setup for G-SPEED Q
  ...
I've installed the G-SPEED eS card, installed the drivers but the speed seems to be slow
Once I received the G-SPEED eS unit, I installed the raid controller card that shipped with my unit, installed drivers and restarted my system. When I run a speed test such as AJA's system test application i'm not getting similar speed reading as reported on the product page on G-Tech's website.  ...
Formatting NTFS for Windows
 This article contains information on how to format your G-Technology Hard Drive in NTFS for use with Windows....
Safely Ejecting Your G-Technology Drive
 How to properly eject your drive before disconnecting or powering off....
External Drive Troubleshooting - Mac
Basic steps for troubleshooting your G-Technology external drive on the Mac...