CompanyLogo
Search Advanced Search
Categories
General Questions (53)
Studio Series (20)
Evolution Series (27)
G-DRIVE Family (41)
G-RAID Family (51)
G-SPEED/G-SAFE Family (52)
G-CONNECT (53)
G-MINI (16)
G-SATA (15)
Search
Advanced Search
FAQs
Search our FAQ to find resolutions to common issues.
How do I make my G-Technology drive bootable ?

All hard drives can be made bootable if the following is taken in to consideration.
 
First, your hard drive has to have a Firewire port. Booting on a Mac using the usb is not supported.
 
Second, you have to know what kind of computer you have. For example, PowerPC such as a G3,G4,G5 or an Intel based such as a MacPro, MacBookPro, Macbooks, iMac’s or Mac Mini’s with Intel Core Duo processors.
 
If you have a Power PC then you have to make sure that your hard drive is using the Apple Partition Map. Power PC computers can only boot if the drive connected is formatted as an Apple Partition Map and if it contains an operating system such as Mac OS X (Panther, Tiger, Leopard)
 
Use the following steps to find out what format your external drive was originally set up as.
 
1. Using your keyboard press the following three keys:
 
Shift – Command (Open Apple) and the letter “A” to access your applications folder 
 
2. Scroll down and double click on the folder titled “Utilities”
 
3. Select the Disk Utility Application and double click to launch it.



4. Select the icon associated to the capacity of your G-Technology Drive



5. Now, to tell if your drive was formatted from Apple Partition Map. If it was, you would see the following…



6. If your drive was formatted as GUID you would see the following.



7. If you need to format your drive as GUID or APM you can do so by accessing the options tab under the Partition section.



8. If you selected the correct option then you should see the following screen.



9. Select the appropriate partition scheme for your system. Click on OK to confirm the selection then click on partition to format your drive. ( Please note: by doing so you will loose all information which may be contained on the drive. So please back up any important information two at least two places.)
 
10. After your drive is set up correctly then you can use Super Duper to clone your computers drive to the external drive to use it as a boot up drive. Or, you can always install a new operating system on it.


Print  Email  Save  Notify Me  Delete from Favorites 
Article ID: 7 Article Created: 08-06-2009 21:50 PMLast Modified: 07-31-2013 13:41 PM

How well did this article answer your question? 100% 75% 50% 25% 0%

Most Recently Viewed Articles
My G-Drive is formatted for Mac out of the box. How do I format the drive for use on Windows?
 Windows recognizes the drive as a GPT protected partition......
How can I change the RAID settings on my G-RAID mini?
 Using the G-Technology configurator, you can change the RAID settings to either RAID 0 (Stripe) or RAID 1 (Mirror)....
How to format/reformat your drive for Mac (HFS+)
 Follow these steps to format your drive for use on the Mac:...
G-CONNECT System Requirements and Box Contents
The G-CONNECT device has support for the following Operating Systems. The device is ready for use with Apple® Mac OS X® and Microsoft Windows® systems and comes formatted as FAT-32, which is ideal for cross-platform use....
On Windows I can't initialize my G-Technology hard drive. Disk Management says it is a "GPT Protective Partition."
On a Windows system drives show up as a "GPT protective partition" and are unable to be formatted. REASON: G-Technology drives are formatted at the factory for Mac OS.  Changes to the Mac OS in 10.5 and above have caused an incompatibility with Windows OS, requiring the drive to be "cleaned" before being formatted.  The process to "clean" the drive outlined in this article. ...
Formatting and Partitioning the G-CONNECT
The G-CONNECT comes pre-formatted FAT32 for cross functional platforms, Windows OS and Mac OS. G-Technology highly recommends leaving the G-CONNECT as FAT32....
How to copy files to your G-Technology external hard drive
 Copying files over to the g-technology external hard drive in both Windows and Mac....
How do I setup my drive for use as a Time Machine backup?
In most cases when a new drive is connected to the system Time Machine will prompt you for the setup. If this does not   happen or if you are... ...
Drive is not recognized in Windows
What to do if your external g-technology drive is not recognized by Windows....
I cannot login using the web address
Ensure that you are first connected to the G-CONNECT by selecting the device in your Wi-Fi Networks list. You must be connected to the G-CONNECT before you will be able to access the content. ...