CompanyLogo
Search Advanced Search
Categories
General Questions (53)
Studio Series (20)
Evolution Series (27)
G-DRIVE Family (41)
G-RAID Family (51)
G-SPEED/G-SAFE Family (52)
G-CONNECT (53)
G-MINI (16)
G-SATA (15)
Search
Advanced Search
FAQs
Search our FAQ to find resolutions to common issues.
External Drive Troubleshooting - Mac

 

MAC

STEP 1
Check the power and data cable

  • Check that the power cable is securely connected to the external drive and wall socket (applies only to desktop external hard drives).
  • Do not connect the drive through a USB hub, connect it directly to the Mac. Make sure the power adapter is connected directly to a wall outlet, not to an extension cord.
  • Ensure the cable is securely connected to both the drive and computer.
  • If your external hard drive came with with a Y-cable, use both USB connectors to ensure the drive is getting the appropriate power.
  • If you are connecting to a Mac, use the USB ports found on the back of the computer. Avoid using USB ports found on keyboards, monitors or the front of the Mac.
  • If the problem still continues, try using a different USB port.


STEP 2
Check the Drive Partition using Disk Utilities

  1. Click "Go" on the top menu bar, then choose "Utilities" and open the "Disk Utility" application.
  2. If the drive is not on the desktop or if "Disk Utility" is showing that the drive is formatted in a file system that is not recognized by the Mac OS, the drive can be formatted so the the Mac OS will recognize it.

 

STEP 3
Check System Profiler

The Mac System Profiler will show you whether the external drive is physically detected by the Mac.

  1. Click on the "Apple Menu" in the top left corner of your desktop.
  2. Select "About this Mac" and then click on "More Info" to open the System Profiler Application.
  3. When the System Profiler opens click on "USB" in the left menu under the Hardware category.
  4. If the drive is still not visible, try connecting it to a second Mac to verify the issue.
  5. If the drive fails on the second Mac, create an RMA and return the drive under Warranty.

Print  Email  Save  Notify Me  Delete from Favorites 
Article ID: 54 Article Created: 04-01-2011 00:05 AMLast Modified: 09-11-2013 18:07 PM

How well did this article answer your question? 100% 75% 50% 25% 0%

Most Recently Viewed Articles
External Drive Troubleshooting - Mac
Basic steps for troubleshooting your G-Technology external drive on the Mac...
How do I setup my drive for use as a Time Machine backup?
In most cases when a new drive is connected to the system Time Machine will prompt you for the setup. If this does not   happen or if you are... ...
Safely Ejecting Your G-Technology Drive
 How to properly eject your drive before disconnecting or powering off....
Can I daisy chain Thunderbolt 2 and Thunderbolt 1 devices?
Yes, but if you would do that, make sure that the Thunderbolt 1 devices are placed after the Thunderbolt 2 devices. If a Thunderbolt 2 device would be daisy chained after a Thunderbolt 1 device, it will operate at Thunderbolt 1 speeds.  ...
Will my Thunderbolt 1 devices work with Thunderbolt 2?
Yes, the Thunderbolt 2 uses the same connectors, thus the Thunderbolt 1 device will work, but the Thunderbolt 2 port will perform at Thunderbolt 1 speeds (10Gbps) ...
What is Thunderbolt 2?
Thunderbolt 2 uses the same size port and Thunderbolt cable, but doubles the speed by using a controller chip that uses the original two 10Gbps bi-directional channels and combines them into a single 20Gbps bi-directional channel. Thunderbolt 2 will also support DisplayPort 1.2, which enables video streaming to one 4k monitor, or dual QHD displays. Thunderbolt 2 is backward compatible with Thunderbolt.  ...
How much space will I have available in RAID?
    ...
Which RAID Set should I use?
Depending on your requirements, there are 5 different types of RAID configurations available that are outlined in this article....
What happens when I pull the Thunderbolt cable out of the host or the G-RAID Studio while the host is still powered on?
  ...
How do I know which hard drive has failed in JBOD?
  ...