CompanyLogo
Search Advanced Search
Categories
General Questions (53)
Studio Series (20)
Evolution Series (27)
G-DRIVE Family (41)
G-RAID Family (51)
G-SPEED/G-SAFE Family (52)
G-CONNECT (53)
G-MINI (16)
G-SATA (15)
Search
Advanced Search
FAQs
Search our FAQ to find resolutions to common issues.
Difficulties transferring files 30GB or greater with the G-DRIVE and G-SPEED

G-Technology places a high value on the quality of our products and we want our customers to always expect that our products meet your expectations.

Recently, it has come to our attention that a limited amount of 1TB G-DRIVE and 4TB G-SPEED external hard drives were built using an internal hard drive with incorrect firmware.  This firmware causes problems when transferring large files of 30GB or greater.  Your data, however, is not affected. Although we estimate that only a few units shipped have this problem, we are now screening all hard drives used in our G-SPEED and G-DRIVE lines to ensure that the correct firmware is used. However, it is possible that some customers may have a unit that experiences this problem.

If you bought either the 1TB G-DRIVE or a 4TB G-SPEED between March and April of 2010, please contact technical support to determine if your drive is affected by this issue.  If it is affected, G-Technology will be happy to arrange a replacement of the unit.

Thank you for your continued support of G-Technology.


Print  Email  Save  Notify Me  Delete from Favorites 
Article ID: 43 Article Created: 05-28-2010 12:16 PMLast Modified: 12-17-2010 11:32 AM

How well did this article answer your question? 100% 75% 50% 25% 0%

Related Articles
Does G-Technology provide software to back up my computer
We do not provide backup software. You could use one of the following solutions....
How do I create a RAID set with a G-SATA (and more)?
How to create a RAID set on Windows or OS X...
How do I make my G-Technology drive bootable ?
All hard drives can be made bootable if the following is taken in to consideration....
Connecting G-Drive Mini with Mac G5 Systems
G-Technology places a high value on the quality of our products and we want our customers to always expect that our products meet your expectations.  Recently, it has come to our attention ...

Most Recently Viewed Articles
What happens when I pull the Thunderbolt cable out of the host or the G-SPEED Studio R while the host is still powered on?
  ...
Is Thunderbolt backward compatible with USB and FireWire?
Third party vendors will sell adapters that will allow you to connect USB and FireWire devices to Thunderbolt ports. However, you will still be limited to the performance of their built-in components. For example, a FireWire 800 device still will not be able to transfer data than 800Mbps....
How to find the g-technology drive on your computer
How to find the g-technology drive on Windows and Mac computers. ...
Is the G-SPEED eS compatible with OSX 10.5 / Leopard?
Yes - you will need to download and install the latest drivers listed in this article....
I want to use my G-Technology drive on BOTH Mac and Windows
All G-Technology drives are formatted for Mac Operating System. To use these drives on both Windows and Mac platforms, you have two options....
I get "Delayed Write Failed" error when transferring files to/from my G-Technology drive on WinXP
  ...
Using RAID Modes
This article contains instructions on how to use G-Technology RAID Configuration Utility....
Setting up G-CONNECT
To get started, you will need your G-CONNECT, a personal computer with a web browser installed. Please review the System Requirements section to make sure you have a supported operating system and web browser....
Drive is not recognized in Windows
What to do if your external g-technology drive is not recognized by Windows....
Can I use any USB cable with my G-Technology Drive?
 We recommend using only the included USB cable with your drive....