CompanyLogo
Search Advanced Search
Categories
General Questions (55)
Studio Series (23)
Evolution Series (28)
G-DRIVE Family (42)
G-RAID Family (52)
G-SPEED/G-SAFE Family (53)
G-CONNECT (53)
G-MINI (16)
G-SATA (15)
Search
Advanced Search
FAQs
Search our FAQ to find resolutions to common issues.
Copying Content to G-CONNECT

Copying Content to G-CONNECT

G-CONNECT can be accessed in several ways. Depending on your needs and location, you can use one or all of the following methods to upload content to your G-CONNECT.

Copy Content in USB Mode

For large amounts of content we recommend using the G–CONNECT as a USB drive.

First you will need to power off the G-CONNECT by pressing the power button found on the device until the LED's begin flashing. When the LED's turn off, it is safe to disconnect the power adapter. Plug the two identical ends of the Y-Cable into your personal computer and the third into your G-CONNECT.

Your G-CONNECT should now appear as a drive on your Desktop if using Mac OS X and in Computer if using Windows.

To learn more about connecting to G-CONNECT as a USB drive, please visit How to add files using USB *for additional information.

For other ways to add content to your G-CONNECT device, please visit:


Print  Email  Save  Notify Me  Add to Favorites 
Article ID: 96 Article Created: 07-22-2013 14:12 PMLast Modified: 07-22-2013 14:12 PM

How well did this article answer your question? 100% 75% 50% 25% 0%

Most Recently Viewed Articles
My G-SPEED Sometimes Will Not Mount
In most cases the G-SPEED auto detects the speed of the fibrer channel connection, however sometimes it does not, causing the volume not to mount....
Setting up G-CONNECT
To get started, you will need your G-CONNECT, a personal computer with a web browser installed. Please review the System Requirements section to make sure you have a supported operating system and web browser....
My G-RAID (Legacy) randomly un-mounts from my system
  MAC OS X Symptoms You may get the error “Device Removal – The device you removed was not properly put away...” or the “Spinning Beach Ball.” Windows XP Symptoms The drive is no longer visible in Explorer or you may get the “Spinning Hour Glass” when accessing the drive. This condition affected some G-RAID units manufactured around Aug 2006.  ...
What is the difference between the G-DRIVE and G-RAID?
   ...
Can I boot my Mac from a Thunderbolt drive?
The G-RAID Thunderbolt is not supported as a boot volume....
How do I setup my G-Technology drive for use with Time Machine?
G-Technology drives are designed to be compatible with the Apple Time Machine software....
Can I use any USB cable with my G-Technology Drive?
 We recommend using only the included USB cable with your drive....
Adding Content to G-CONNECT
Once your G-CONNECT device is set up, you will be ready to transfer content onto it for your viewing pleasure. The device has been pre-loaded with the following category folders, which is the recommended way to organize your files when you add content....
Using the RAID function within Mac OS for your G-RAID Thunderbolt
 ...
Can I access my G-CONNECT content through iTunes?
Yes you can access your G-CONNECT content through iTunes....