CompanyLogo
Search Advanced Search
Categories
General Questions (53)
Studio Series (20)
Evolution Series (27)
G-DRIVE Family (41)
G-RAID Family (51)
G-SPEED/G-SAFE Family (52)
G-CONNECT (53)
G-MINI (16)
G-SATA (15)
Search
Advanced Search
FAQs
Search our FAQ to find resolutions to common issues.
Automatic Software Updates

Automatic Software Updates

The G-CONNECT automatic update feature keeps your G-CONNECT up-to-date with the latest software. Follow the steps below to make sure your G-CONNECT is current.

Plug your G-CONNECT into your home router using an Ethernet cable. The automatic update feature requires an Internet connection. Power on your G-CONNECT and it will automatically check and install any required updates. The Status and Wi-Fi LED's will flash as the device is updating. Once complete the 'Status' LED will stop flashing and your G-CONNECT will be ready for use.


Print  Email  Save  Notify Me  Add to Favorites 
Article ID: 92 Article Created: 07-22-2013 13:54 PMLast Modified: 07-22-2013 14:07 PM

How well did this article answer your question? 100% 75% 50% 25% 0%

Most Recently Viewed Articles
How do I setup my drive for use as a Time Machine backup?
In most cases when a new drive is connected to the system Time Machine will prompt you for the setup. If this does not   happen or if you are... ...
Setting up G-CONNECT
To get started, you will need your G-CONNECT, a personal computer with a web browser installed. Please review the System Requirements section to make sure you have a supported operating system and web browser....
Fixing performance issues when using the FireWire interface on the Microsoft Windows OS
 If you are running the Microsoft Windows OS and are experiencing slow disk drive performance please follow the steps below to correct the issue: ...
I'm using copper cables that causes the G-Speed to be inconsistent
If you're using copper cables with your G-Speed and are experiencing inconsistent mounting both G-Technology and ATTO recommend that you switch to Fiber Channel Cables for consistent performance....
My G-Drive is formatted for Mac out of the box. How do I format the drive for use on Windows?
 Windows recognizes the drive as a GPT protected partition......
Formatting NTFS for Windows
 This article contains information on how to format your G-Technology Hard Drive in NTFS for use with Windows....
Can I use any USB cable with my G-Technology Drive?
 We recommend using only the included USB cable with your drive....
External Drive Troubleshooting - Mac
Basic steps for troubleshooting your G-Technology external drive on the Mac...
How do I change the RAID settings on my G-RAID Studio(Windows)?
 Step by step instructions on changing the RAID settings on my G-RAID Studio for Windows....
I cannot login using the web address
Ensure that you are first connected to the G-CONNECT by selecting the device in your Wi-Fi Networks list. You must be connected to the G-CONNECT before you will be able to access the content. ...