CompanyLogo
Search Advanced Search
Categories
General Questions (55)
Studio Series (23)
Evolution Series (28)
G-DRIVE Family (42)
G-RAID Family (52)
G-SPEED/G-SAFE Family (53)
G-CONNECT (53)
G-MINI (16)
G-SATA (15)
Search
Advanced Search
FAQs
Search our FAQ to find resolutions to common issues.
How to set up a RAID 1?

To create a RAID 1 set, open the Disk Utility program. This application is located on your hard drive under Applications/Utilities/Disk Utility.

1. The Disk Utility window will appear. Your G-DOCK will be displayed in the left-hand column. Information about the drive displays at the bottom of the window.

2. Select the RAID tab to view the RAID options.

3. Select G-DRIVE ev by clicking its icon in the left-side column. You want to choose the volume icon, not the disk icon. The volume is a partition that the Mac OS recognizes.

4. In the RAID Set Name field, name the drive. Make that name relevant to the content that it's holding. For instance, you could name it by the project and add a date.

5. From the RAID Type menu, choose Mirrored Raid Set.

6. To create the RAID set, from the left-side column, drag the two “disk" icons into the empty list area. You will now see "disk1" and "disk2" in that list.

7. Note that the estimated size goes to 1 TB of capacity, instead of 2 TB. You only see the capacity of one drive because it's copied (or mirrored) on the second drive.

8. Click the Create button in the lower right corner of the window. A dialog box will appear asking if you want to erase the G-DOCK partition.

WARNING: THIS NEXT STEP WILL ERASE ALL DATA ON YOUR DRIVE.

9. Click the Create button to continue. A progress bar in the lower right corner of the window will show the progress of the disk's reformatting.

10. On your computer desktop, you will now see a drive icon. This represents the RAID 1 volume, and indicates the paired mode of your two G-DOCK ev cartridges

11. The Disk Utility window will show the results. There are two 1 TB drives that are paired as "RAID slices." Their total capacity is listed as 1 TB.

12. Quit the Disk Utility program.

 


Print  Email  Save  Notify Me  Add to Favorites 
Article ID: 83 Article Created: 06-25-2013 15:48 PMLast Modified: 04-03-2014 18:20 PM

How well did this article answer your question? 100% 75% 50% 25% 0%

Most Recently Viewed Articles
Is it ok to stack my G-DRIVEs on top of one another?
The short answer is yes....
My G-Speed eS works with Mac OS X Tiger but not on Leapord
  ...
Removing Drives From A Multi-bay Unit
This article contains a refrence guide on how to remove hard drives from your multi-bay G-Technology product....
How to format/reformat your drive for Mac (HFS+)
 Follow these steps to format your drive for use on the Mac:...
Drive is not recognized in Windows
What to do if your external g-technology drive is not recognized by Windows....
What is Thunderbolt 2?
Thunderbolt 2 uses the same size port and Thunderbolt cable, but doubles the speed by using a controller chip that uses the original two 10Gbps bi-directional channels and combines them into a single 20Gbps bi-directional channel. Thunderbolt 2 will also support DisplayPort 1.2, which enables video streaming to one 4k monitor, or dual QHD displays. Thunderbolt 2 is backward compatible with Thunderbolt.  ...
External Drive Troubleshooting - Windows
Basic External Drive Troubleshooting steps for Windows. ...
Quick Setup for G-Technology Products
    ...
Formatting NTFS for Windows
 This article contains information on how to format your G-Technology Hard Drive in NTFS for use with Windows....
How to find the g-technology drive on your computer
How to find the g-technology drive on Windows and Mac computers. ...