CompanyLogo
Search Advanced Search
Categories
General Questions (55)
Studio Series (23)
Evolution Series (28)
G-DRIVE Family (42)
G-RAID Family (52)
G-SPEED/G-SAFE Family (53)
G-CONNECT (53)
G-MINI (16)
G-SATA (15)
Search
Advanced Search
FAQs
Search our FAQ to find resolutions to common issues.
How can I change the RAID settings on my G-RAID mini?

 

Using the G-Technology configurator, you can change the RAID settings to either RAID 0 (Stripe) or RAID 1 (Mirror). The RAID 0 setting will allow for an increased performance across both drives and display the maximum capacity available. The RAID 1 configuration allows you to write the same information to both drives providing a better level of protection in the event one drive fails, however RAID 1 will reduce the capacity of the drive to 50% of the advertised capacity.

 

Use the following link to download the G-Technology RAID configurator for G-RAID mini:

http://g-technology.com/support/g-raid-mini-raid-configurator

 

 

 

 

 

 

 

 

 

 

 

 


Print  Email  Save  Notify Me  Add to Favorites 
Article ID: 72 Article Created: 11-29-2011 16:19 PMLast Modified: 07-25-2013 19:22 PM

How well did this article answer your question? 100% 75% 50% 25% 0%

Most Recently Viewed Articles
How do I restore the look of my drive icon after I've formatted my G-Technology drive on the Mac?
 Follow these instructions to restore the look of your G-Technology drive icons after formatting on Mac....
How many TB of storage will I have available using RAID 0/RAID 5 in my G-SPEED Q?
   ...
Drive is not recognized in Windows
What to do if your external g-technology drive is not recognized by Windows....
How to format your drive for use with both Windows and Mac (FAT 32)
 Follow these steps to format your drive for both Windows and Mac...
I'm using copper cables that causes the G-Speed to be inconsistent
If you're using copper cables with your G-Speed and are experiencing inconsistent mounting both G-Technology and ATTO recommend that you switch to Fiber Channel Cables for consistent performance....
Quick Setup for G-Technology Products
    ...
Connecting to G-CONNECT over ethernet using a web browser
To access the G-CONNECT Web Application when the device is connected to your home Wi-Fi network via an Ethernet connection, follow the below steps....
How to set up a RAID 1?
To create a RAID 1 set, open the Disk Utility program. This application is located on your hard drive...
Replace a Failed Drive Module/Rebuilding RAID 5 for G-SPEED Q
  ...
Setting up and adjusting Time Machine
You use the Time Machine pane of System Preferences to set up automatic backups. If you've already set up Time Machine, you can change to a different backup disk, or adjust other settings....