CompanyLogo
Search Advanced Search
Categories
General Questions (53)
Studio Series (20)
Evolution Series (27)
G-DRIVE Family (41)
G-RAID Family (51)
G-SPEED/G-SAFE Family (52)
G-CONNECT (53)
G-MINI (16)
G-SATA (15)
Search
Advanced Search
FAQs
Search our FAQ to find resolutions to common issues.
How to format your drive for use with both Windows and Mac (FAT 32)

 

Due to the differences between a Mac OS X and Microsoft Windows, formatting a drive for both Mac and Windows will limit maximum file sizes of 4GB. If you plan on using files larger than 4GB, please format the drive for ONLY Mac (HFS+) or ONLY Windows (NTFS).

 

NOTE: The steps below use the G-Drive slim as an example only. The steps remain the same regardless of the G-Technology product you're attempting to format.

 

WARNING: Any data on the drive will be erased in this process. 
 Please backup any data on the drive before proceeding.

 

Follow these steps to format your drive for both Mac and Windows:

  1. On your Mac, connect and power the drive
  2. Open Mac HD, Macintosh HD or the name of your main hard drive in the finder
  3. Open Applications > Utilities > Disk Utility


  4. Once the Disk Utility application has opened, your external hard drive should be listed on the left. It should show the drive size with a second indented line beneath it that shows the existing partition


     
  5. Select the Erase tab at the top of the screen


     
  6. Select MS DOS (FAT) for the volume format option
  7. Change the name of the drive if desired
  8. Click Erase at the bottom of the screen. You will receive a warning message asking you to confirm the erase procedure

When the process completes, the drive will be ready for use by selecting it on your Desktop or Finder window

 

 


Print  Email  Save  Notify Me  Add to Favorites 
Article ID: 58 Article Created: 04-01-2011 00:22 AMLast Modified: 07-22-2013 13:03 PM

How well did this article answer your question? 100% 75% 50% 25% 0%

Most Recently Viewed Articles
My G-Safe is running warmer than normal and the fan is not turning on. How do I fix this?
To resolve this issue you can either re-boot the unit or press the......
How do I initialize G-RAID?
How to initialize G-RAID on Macintosh or Windows system....
How do I setup my G-Technology drive for use with Time Machine?
G-Technology drives are designed to be compatible with the Apple Time Machine software....
Can I use any USB cable with my G-Technology Drive?
 We recommend using only the included USB cable with your drive....
Transferring Files using the USB Y-Cable
First you will need to power off the G-CONNECT by pressing the power button found on the device until the LED's begin flashing. When the LED's turn off, it is safe to disconnect the power adapter. Plug the two identical ends of the Y-Cable into your personal computer and the third into your G-CONNECT....
Can I use 3rd party hard drives in my GSafe/GSpeed units?
   ...
On Windows I can't initialize my G-Technology hard drive. Disk Management says it is a "GPT Protective Partition."
On a Windows system drives show up as a "GPT protective partition" and are unable to be formatted. REASON: G-Technology drives are formatted at the factory for Mac OS.  Changes to the Mac OS in 10.5 and above have caused an incompatibility with Windows OS, requiring the drive to be "cleaned" before being formatted.  The process to "clean" the drive outlined in this article. ...
How many TB of storage will I have available using RAID 0/RAID 5 in my G-SPEED Q?
   ...
I cannot login using the web address
Ensure that you are first connected to the G-CONNECT by selecting the device in your Wi-Fi Networks list. You must be connected to the G-CONNECT before you will be able to access the content. ...
My drive was working; it powers up but I can’t seem to access it?
 Mac and Windows external drive troubleshooting....