CompanyLogo
Search Advanced Search
Categories
General Questions (41)
G-CONNECT (53)
G-DRIVE ev (6)
G-DRIVE ev PLUS (6)
G-DOCK ev with Thunderbolt (15)
G-DRIVE (21)
G-DRIVE mini (25)
G-DRIVE mobile (18)
G-DRIVE mobile USB (17)
G-DRIVE slim (17)
G-MINI (16)
G-RAID (26)
G-RAID (legacy) (22)
G-RAID mini (25)
G-RAID Thunderbolt (15)
G-SATA (15)
G-SAFE (19)
G-SPEED (24)
G-SPEED Q (25)
G-SPEED eS PRO (21)
G-SPEED eS (33)
G-SPEED FC (16)
G-SPEED FC XL (20)
XL 12 (14)
XL 16 (14)
Search
Advanced Search
FAQs
Search our FAQ to find resolutions to common issues.
Drive is not recognized in Windows

Start by verifying the cables are securely connected to the drive. If the USB cable that came with a Y-Cable, connect both to USB ports found on the back of your computer. This will ensure your drive is getting the appropriate power.

If the drive is still unrecognized, check to see if the drive appears in Disk Management. To open Disk Management, right click My Computer and choose Manage. Disk Management is found on the left under Storage.

WinXP_Manage

In Disk Management, drives are listed as Disk 0, Disk 1, etc. Disk 0 is assigned as the primary hard drive on your computer (the c: drive). Depending on the number of drives or partitions on your system the external drive will commonly be identified as Disk 1 orDisk 2.

NOTE: In the event you have multiple drives attached to your system, it can be helpful to look for the drive capacity.

 

  1. If the drive has a letter assigned, minimize the Disk Management window and open My Computer. If the drive letter appears in My Computer, the drive is properly recognized by the system.

    WinXP_DiskManagement
  2. If the drive letter you identified in Disk Management is assigned to a drive other than your HGST external hard drive you will need to manually set the drive letter.

 

To manually assign a drive letter, bring up Disk Management and right click on the capacity of the drive.

 

 

  1. Choose Change Drive Letter and Path from the menu.

    WinXP_ChangeDriveLetterMenu
  2. Select Change and select an available letter from the drop box.

IMPORTANT: Choose a drive letter that does not already appear in My Computer.

  1. Click OK to assign the drive letter and close the window.
     
  2. Once assigned, the drive should appear in My Computer with the letter you have selected.
     
  3. If the drive is listed as Unknown or Unallocated in Disk Management, the drive is not properly formatted for use with this computer. If the drive was used with a Mac or another non-windows device it may be using an incompatible format.

    WARNING: Any data on the drive will be erased in this process. 
 Please backup any data on the drive before proceeding.

    1. If the drive shows Unknown, right click on the word Unknown and choose Initialize. Follow the wizard, accepting the defaults. The drive should now be labeled Unallocated.
       
    2. If the drive shows as Unallocated, right click on the word Unallocated and choose New Partition (2000/XP) or New Simple Volume (Vista/Win7). Follow the wizard, accepting the default settings. Clicking finish will begin the format process. The format will generally take 10-15min, but can vary depending on drive size. When the format is complete the drive can be found under My Computer labeled New Volume.

      If you wish to change the name of the drive, right click on the for the drive icon and choose rename from the menu.

 


Print  Email  Save  Notify Me  Add to Favorites 
Article ID: 56 Article Created: 04-01-2011 00:12 AMLast Modified: 09-11-2013 18:09 PM

How well did this article answer your question? 100% 75% 50% 25% 0%

Most Recently Viewed Articles
How much video can I store on my G-Technology Drive?
It is dependent on the type of video footage you are working with. See the chart below for more information....
How to find the g-technology drive on your computer
How to find the g-technology drive on Windows and Mac computers. ...
How to format/reformat your drive for Mac (HFS+)
 Follow these steps to format your drive for use on the Mac:...
Connecting to G-CONNECT over ethernet using a web browser
To access the G-CONNECT Web Application when the device is connected to your home Wi-Fi network via an Ethernet connection, follow the below steps....
How much space will I have available in RAID?
    ...
Setting up and adjusting Time Machine
You use the Time Machine pane of System Preferences to set up automatic backups. If you've already set up Time Machine, you can change to a different backup disk, or adjust other settings....
What is the difference between the G-DRIVE and G-RAID?
   ...
Is it okay to leave my external drive turned on all the time?
   ...
My G-Technology drive does not show up on my Windows computer
Out of the box, all G-Technology drives are formatted for Mac Operating Systems. Depending on whether or not you will be using your G-Technology drive on both Mac/Windows or Windows only, you will need to reformat it for NTFS or ex-FAT. Click to read more....
I'm using copper cables that causes the G-Speed to be inconsistent
If you're using copper cables with your G-Speed and are experiencing inconsistent mounting both G-Technology and ATTO recommend that you switch to Fiber Channel Cables for consistent performance....