CompanyLogo
Search Advanced Search
Categories
General Questions (53)
Studio Series (20)
Evolution Series (27)
G-DRIVE Family (41)
G-RAID Family (51)
G-SPEED/G-SAFE Family (52)
G-CONNECT (53)
G-MINI (16)
G-SATA (15)
Search
Advanced Search
FAQs
Search our FAQ to find resolutions to common issues.
Drive is not recognized in Windows

Start by verifying the cables are securely connected to the drive. If the USB cable that came with a Y-Cable, connect both to USB ports found on the back of your computer. This will ensure your drive is getting the appropriate power.

If the drive is still unrecognized, check to see if the drive appears in Disk Management. To open Disk Management, right click My Computer and choose Manage. Disk Management is found on the left under Storage.

WinXP_Manage

In Disk Management, drives are listed as Disk 0, Disk 1, etc. Disk 0 is assigned as the primary hard drive on your computer (the c: drive). Depending on the number of drives or partitions on your system the external drive will commonly be identified as Disk 1 orDisk 2.

NOTE: In the event you have multiple drives attached to your system, it can be helpful to look for the drive capacity.

 

  1. If the drive has a letter assigned, minimize the Disk Management window and open My Computer. If the drive letter appears in My Computer, the drive is properly recognized by the system.

    WinXP_DiskManagement
  2. If the drive letter you identified in Disk Management is assigned to a drive other than your HGST external hard drive you will need to manually set the drive letter.

 

To manually assign a drive letter, bring up Disk Management and right click on the capacity of the drive.

 

 

  1. Choose Change Drive Letter and Path from the menu.

    WinXP_ChangeDriveLetterMenu
  2. Select Change and select an available letter from the drop box.

IMPORTANT: Choose a drive letter that does not already appear in My Computer.

  1. Click OK to assign the drive letter and close the window.
     
  2. Once assigned, the drive should appear in My Computer with the letter you have selected.
     
  3. If the drive is listed as Unknown or Unallocated in Disk Management, the drive is not properly formatted for use with this computer. If the drive was used with a Mac or another non-windows device it may be using an incompatible format.

    WARNING: Any data on the drive will be erased in this process. 
 Please backup any data on the drive before proceeding.

    1. If the drive shows Unknown, right click on the word Unknown and choose Initialize. Follow the wizard, accepting the defaults. The drive should now be labeled Unallocated.
       
    2. If the drive shows as Unallocated, right click on the word Unallocated and choose New Partition (2000/XP) or New Simple Volume (Vista/Win7). Follow the wizard, accepting the default settings. Clicking finish will begin the format process. The format will generally take 10-15min, but can vary depending on drive size. When the format is complete the drive can be found under My Computer labeled New Volume.

      If you wish to change the name of the drive, right click on the for the drive icon and choose rename from the menu.

 


Print  Email  Save  Notify Me  Add to Favorites 
Article ID: 56 Article Created: 04-01-2011 00:12 AMLast Modified: 09-11-2013 18:09 PM

How well did this article answer your question? 100% 75% 50% 25% 0%

Most Recently Viewed Articles
Are there any other ways to access the content on the G-CONNECT with my iOS device?
The G–CONNECT supports a variety of interface protocols that allow you to access, view and play content directly from the G–CONNECT....
I forgot my G-CONNECT Wireless Network Password
There may be certain situations in which you need to reset* the G-CONNECT device. Typically, this happens when you misplace or lose your Wireless Network SSID password....
How to format your drive for use with both Windows and Mac (FAT 32)
 Follow these steps to format your drive for both Windows and Mac...
I moved a lot of files to the trash, but the computer says my disk is full, why?
Simply throwing files or folder to the trash does not delete it from the hard drive. This is done so that one can recover a file or folder that may have been thrown in the trash....
I can't format my Drive via USB connection on my Mac.I keep getting a spinning beach ball.
There is a known issue with Mac OS X 10.4.6 and 10.4.7 when attempting to format via a USB connection. When clicking "ERASE" in Disk Utility all you get is the spinning beach ball....
How many Thunderbolt devices can I attach?
One of the great features with Thunderbolt technology is the ability to daisy-chain up to 6 high-performance devices. Please note that only 2 display devices can be used within the 6 Thunderbolt device daisy chain. Additionally, any device with only one Thunderbolt port must be the last device in the daisy-chain....
My G-Technology drive is spinning down after a period of time
This is often due to the operating system putting the drives to sleep. If you do not want the drives to spin down, you will need to turn off the sleep settings in your associated operating system. ...
Can I use 3rd party hard drives in my GSafe/GSpeed units?
   ...
What RAID settings does G-RAID ship in?
The G-RAID ships in a RAID 0 (Stripe) configuration allowing for increased performance....
When trying to access my drive I get the "Spinning beach ball" on the MAC or the "Spinning hourglass" on the PC
 ...