CompanyLogo
Search Advanced Search
Categories
General Questions (53)
Studio Series (20)
Evolution Series (27)
G-DRIVE Family (41)
G-RAID Family (51)
G-SPEED/G-SAFE Family (52)
G-CONNECT (53)
G-MINI (16)
G-SATA (15)
Search
Advanced Search
FAQs
Search our FAQ to find resolutions to common issues.
Drive is not recognized in Windows

Start by verifying the cables are securely connected to the drive. If the USB cable that came with a Y-Cable, connect both to USB ports found on the back of your computer. This will ensure your drive is getting the appropriate power.

If the drive is still unrecognized, check to see if the drive appears in Disk Management. To open Disk Management, right click My Computer and choose Manage. Disk Management is found on the left under Storage.

WinXP_Manage

In Disk Management, drives are listed as Disk 0, Disk 1, etc. Disk 0 is assigned as the primary hard drive on your computer (the c: drive). Depending on the number of drives or partitions on your system the external drive will commonly be identified as Disk 1 orDisk 2.

NOTE: In the event you have multiple drives attached to your system, it can be helpful to look for the drive capacity.

 

  1. If the drive has a letter assigned, minimize the Disk Management window and open My Computer. If the drive letter appears in My Computer, the drive is properly recognized by the system.

    WinXP_DiskManagement
  2. If the drive letter you identified in Disk Management is assigned to a drive other than your HGST external hard drive you will need to manually set the drive letter.

 

To manually assign a drive letter, bring up Disk Management and right click on the capacity of the drive.

 

 

  1. Choose Change Drive Letter and Path from the menu.

    WinXP_ChangeDriveLetterMenu
  2. Select Change and select an available letter from the drop box.

IMPORTANT: Choose a drive letter that does not already appear in My Computer.

  1. Click OK to assign the drive letter and close the window.
     
  2. Once assigned, the drive should appear in My Computer with the letter you have selected.
     
  3. If the drive is listed as Unknown or Unallocated in Disk Management, the drive is not properly formatted for use with this computer. If the drive was used with a Mac or another non-windows device it may be using an incompatible format.

    WARNING: Any data on the drive will be erased in this process. 
 Please backup any data on the drive before proceeding.

    1. If the drive shows Unknown, right click on the word Unknown and choose Initialize. Follow the wizard, accepting the defaults. The drive should now be labeled Unallocated.
       
    2. If the drive shows as Unallocated, right click on the word Unallocated and choose New Partition (2000/XP) or New Simple Volume (Vista/Win7). Follow the wizard, accepting the default settings. Clicking finish will begin the format process. The format will generally take 10-15min, but can vary depending on drive size. When the format is complete the drive can be found under My Computer labeled New Volume.

      If you wish to change the name of the drive, right click on the for the drive icon and choose rename from the menu.

 


Print  Email  Save  Notify Me  Add to Favorites 
Article ID: 56 Article Created: 04-01-2011 00:12 AMLast Modified: 09-11-2013 18:09 PM

How well did this article answer your question? 100% 75% 50% 25% 0%

Most Recently Viewed Articles
How to find the g-technology drive on your computer
How to find the g-technology drive on Windows and Mac computers. ...
On Windows I can't initialize my G-Technology hard drive. Disk Management says it is a "GPT Protective Partition."
On a Windows system drives show up as a "GPT protective partition" and are unable to be formatted. REASON: G-Technology drives are formatted at the factory for Mac OS.  Changes to the Mac OS in 10.5 and above have caused an incompatibility with Windows OS, requiring the drive to be "cleaned" before being formatted.  The process to "clean" the drive outlined in this article. ...
Private and Public Content
Admin and Guest users can access content located on the G-CONNECT device via the File Browser. The device comes with two ways to secure content either by placing them in a Private area or a Public Folder....
External Drive Troubleshooting - Windows
Basic External Drive Troubleshooting steps for Windows. ...
Can I use any USB cable with my G-Technology Drive?
 We recommend using only the included USB cable with your drive....
Drive is not recognized in Windows
What to do if your external g-technology drive is not recognized by Windows....
I'm using copper cables that causes the G-Speed to be inconsistent
If you're using copper cables with your G-Speed and are experiencing inconsistent mounting both G-Technology and ATTO recommend that you switch to Fiber Channel Cables for consistent performance....
I forgot my password, do I need to reset my G-CONNECT?
 If you have forgotten your password you can use the Password Hint to retrieve your password....
Can I use this as a home or small office network attached storage (NAS) or shared storage device?
Yes. With its Ethernet connection, you can use G-CONNECT as a NAS device when at home or in a small office to easily share content with others on your network....
My video displays a thumbnail, but it does not play
Video playback through your browser is dependent on your specific browser configuration and plugins....