CompanyLogo
Search Advanced Search
Categories
General Questions (53)
Studio Series (20)
Evolution Series (27)
G-DRIVE Family (41)
G-RAID Family (51)
G-SPEED/G-SAFE Family (52)
G-CONNECT (53)
G-MINI (16)
G-SATA (15)
Search
Advanced Search
FAQs
Search our FAQ to find resolutions to common issues.
External Drive Troubleshooting - Mac

 

MAC

STEP 1
Check the power and data cable

  • Check that the power cable is securely connected to the external drive and wall socket (applies only to desktop external hard drives).
  • Do not connect the drive through a USB hub, connect it directly to the Mac. Make sure the power adapter is connected directly to a wall outlet, not to an extension cord.
  • Ensure the cable is securely connected to both the drive and computer.
  • If your external hard drive came with with a Y-cable, use both USB connectors to ensure the drive is getting the appropriate power.
  • If you are connecting to a Mac, use the USB ports found on the back of the computer. Avoid using USB ports found on keyboards, monitors or the front of the Mac.
  • If the problem still continues, try using a different USB port.


STEP 2
Check the Drive Partition using Disk Utilities

  1. Click "Go" on the top menu bar, then choose "Utilities" and open the "Disk Utility" application.
  2. If the drive is not on the desktop or if "Disk Utility" is showing that the drive is formatted in a file system that is not recognized by the Mac OS, the drive can be formatted so the the Mac OS will recognize it.

 

STEP 3
Check System Profiler

The Mac System Profiler will show you whether the external drive is physically detected by the Mac.

  1. Click on the "Apple Menu" in the top left corner of your desktop.
  2. Select "About this Mac" and then click on "More Info" to open the System Profiler Application.
  3. When the System Profiler opens click on "USB" in the left menu under the Hardware category.
  4. If the drive is still not visible, try connecting it to a second Mac to verify the issue.
  5. If the drive fails on the second Mac, create an RMA and return the drive under Warranty.

Print  Email  Save  Notify Me  Add to Favorites 
Article ID: 54 Article Created: 04-01-2011 00:05 AMLast Modified: 09-11-2013 18:07 PM

How well did this article answer your question? 100% 75% 50% 25% 0%

Most Recently Viewed Articles
Transferring Files using the USB Y-Cable
First you will need to power off the G-CONNECT by pressing the power button found on the device until the LED's begin flashing. When the LED's turn off, it is safe to disconnect the power adapter. Plug the two identical ends of the Y-Cable into your personal computer and the third into your G-CONNECT....
How do I make my G-Technology drive bootable ?
All hard drives can be made bootable if the following is taken in to consideration....
Drive is not recognized in Windows
What to do if your external g-technology drive is not recognized by Windows....
Windows Thunderbolt Driver Installation (Marvell)
How to install Thunderbolt Driver for Windows (Marvell Driver)...
Quick Setup for G-Technology Products
    ...
How do I change the RAID settings on my G-RAID Studio(MAC)?
 Instructions on installing and changing the RAID settings for the G-RAID Studio....
Is there a Thunderbolt cable included with the G-DOCK ev with Thunderbolt?
Yes, the Thunderbolt cable is included as well as 2 USB 3.0 cables for the G-DRIVE ev units for using as an external hard drive....
Formatting NTFS for Windows
 This article contains information on how to format your G-Technology Hard Drive in NTFS for use with Windows....
What does RAID mean?
 RAID stands for Redundant Array of Independent Disks......
How to set up a RAID 0?
To create a RAID 0 set, open the Disk Utility program. This application is located on your hard drive under Applications/Utilities/Disk Utility....