CompanyLogo
Search Advanced Search
Categories
General Questions (55)
Studio Series (23)
Evolution Series (28)
G-DRIVE Family (42)
G-RAID Family (52)
G-SPEED/G-SAFE Family (53)
G-CONNECT (53)
G-MINI (16)
G-SATA (15)
Search
Advanced Search
FAQs
Search our FAQ to find resolutions to common issues.
What is the difference between the G-DRIVE and G-RAID?
The G-DRIVE is a single drive product, while the G-RAID contains two drives. The benefit of a single drive unit is smaller size and reduced heat, so no fan is required. The G-RAID uses two drives hardwired as Raid 0 so the computer will see the unit as a single larger drive. The paired drives can increase performance up to 50% over a single drive unit. This increase varies based on connection type and the system’s capabilities.

 


Print  Email  Save  Notify Me  Add to Favorites 
Article ID: 50 Article Created: 03-10-2011 15:42 PMLast Modified: 11-29-2011 16:28 PM

How well did this article answer your question? 100% 75% 50% 25% 0%

Most Recently Viewed Articles
Can I daisy chain Thunderbolt 2 and Thunderbolt 1 devices?
Yes, but if you would do that, make sure that the Thunderbolt 1 devices are placed after the Thunderbolt 2 devices. If a Thunderbolt 2 device would be daisy chained after a Thunderbolt 1 device, it will operate at Thunderbolt 1 speeds.  ...
Will my Thunderbolt 1 devices work with Thunderbolt 2?
Yes, the Thunderbolt 2 uses the same connectors, thus the Thunderbolt 1 device will work, but the Thunderbolt 2 port will perform at Thunderbolt 1 speeds (10Gbps) ...
How many devices can I daisy chain with Thunderbolt 2?
Similar to Thunderbolt 1, Thunderbolt 2 will still support for up to 6 peripherals and will still continue to support USB and FireWire via their respective adapters.  ...
What is Thunderbolt 2?
Thunderbolt 2 uses the same size port and Thunderbolt cable, but doubles the speed by using a controller chip that uses the original two 10Gbps bi-directional channels and combines them into a single 20Gbps bi-directional channel. Thunderbolt 2 will also support DisplayPort 1.2, which enables video streaming to one 4k monitor, or dual QHD displays. Thunderbolt 2 is backward compatible with Thunderbolt.  ...
How do I setup my drive for use as a Time Machine backup?
In most cases when a new drive is connected to the system Time Machine will prompt you for the setup. If this does not   happen or if you are... ...
What is Thunderbolt?
Thunderbolt in an input/output hardware interface, developed by Intel in cooperation with Apple, which allows for external devices to be connected to a computer. Thunderbolt combines PCI Express and DisplayPort, as well as a DC connector for power, in a single connection, passing through a single Thunderbolt cable. You can daisy chain up to 6 peripherals, like storage devices and monitors. You can also connect USB and FireWire devices to the Thunderbolt port, provided that you have the proper adapter, but the speed you will get will still be USB or FireWire speeds, depending on what device you are connecting.  ...
Do I have to keep my computer on while the RAID is building/rebuilding?
The G-SPEED eS does require that you keep your computer running while the RAIDset is building/rebuilding....
How much space will I have available in RAID?
    ...
How do I restore the look of my drive icon after I've formatted my G-Technology drive on the Mac?
 Follow these instructions to restore the look of your G-Technology drive icons after formatting on Mac....
Which RAID Set should I use?
Depending on your requirements, there are 5 different types of RAID configurations available that are outlined in this article....