CompanyLogo
Search Advanced Search
Categories
General Questions (53)
Studio Series (20)
Evolution Series (27)
G-DRIVE Family (41)
G-RAID Family (51)
G-SPEED/G-SAFE Family (52)
G-CONNECT (53)
G-MINI (16)
G-SATA (15)
Search
Advanced Search
FAQs
Search our FAQ to find resolutions to common issues.
How do I setup my drive for use as a Time Machine backup?

In most cases when a new drive is connected to the system Time Machine will prompt you for the setup. If this does not happen or if you are changing the backup drive, click here.

Any disk attached to your computer that can be used to store backups is listed. The list includes internal hard disks except for your startup disk, and most external disks.

When Time Machine performs the first backup of your system, it may take a while. You may want to set up Time Machine in the evening so that the initial backup can be done overnight. Subsequent backups take less time because only items that have changed are backed up.

 

 


Print  Email  Save  Notify Me  Add to Favorites 
Article ID: 47 Article Created: 12-21-2010 22:13 PMLast Modified: 07-22-2013 13:00 PM

How well did this article answer your question? 100% 75% 50% 25% 0%

Most Recently Viewed Articles
Safely Ejecting Your G-Technology Drive
 How to properly eject your drive before disconnecting or powering off....
Can I daisy chain Thunderbolt 2 and Thunderbolt 1 devices?
Yes, but if you would do that, make sure that the Thunderbolt 1 devices are placed after the Thunderbolt 2 devices. If a Thunderbolt 2 device would be daisy chained after a Thunderbolt 1 device, it will operate at Thunderbolt 1 speeds.  ...
Will my Thunderbolt 1 devices work with Thunderbolt 2?
Yes, the Thunderbolt 2 uses the same connectors, thus the Thunderbolt 1 device will work, but the Thunderbolt 2 port will perform at Thunderbolt 1 speeds (10Gbps) ...
What is Thunderbolt 2?
Thunderbolt 2 uses the same size port and Thunderbolt cable, but doubles the speed by using a controller chip that uses the original two 10Gbps bi-directional channels and combines them into a single 20Gbps bi-directional channel. Thunderbolt 2 will also support DisplayPort 1.2, which enables video streaming to one 4k monitor, or dual QHD displays. Thunderbolt 2 is backward compatible with Thunderbolt.  ...
How much space will I have available in RAID?
    ...
Which RAID Set should I use?
Depending on your requirements, there are 5 different types of RAID configurations available that are outlined in this article....
External Drive Troubleshooting - Mac
Basic steps for troubleshooting your G-Technology external drive on the Mac...
What happens when I pull the Thunderbolt cable out of the host or the G-RAID Studio while the host is still powered on?
  ...
How do I know which hard drive has failed in JBOD?
  ...
How much video can I store on my G-Technology Drive?
It is dependent on the type of video footage you are working with. See the chart below for more information....