CompanyLogo
Search Advanced Search
Categories
General Questions (53)
Studio Series (20)
Evolution Series (27)
G-DRIVE Family (41)
G-RAID Family (51)
G-SPEED/G-SAFE Family (52)
G-CONNECT (53)
G-MINI (16)
G-SATA (15)
Search
Advanced Search
FAQs
Search our FAQ to find resolutions to common issues.
Difficulties transferring files 30GB or greater with the G-DRIVE and G-SPEED

G-Technology places a high value on the quality of our products and we want our customers to always expect that our products meet your expectations.

Recently, it has come to our attention that a limited amount of 1TB G-DRIVE and 4TB G-SPEED external hard drives were built using an internal hard drive with incorrect firmware.  This firmware causes problems when transferring large files of 30GB or greater.  Your data, however, is not affected. Although we estimate that only a few units shipped have this problem, we are now screening all hard drives used in our G-SPEED and G-DRIVE lines to ensure that the correct firmware is used. However, it is possible that some customers may have a unit that experiences this problem.

If you bought either the 1TB G-DRIVE or a 4TB G-SPEED between March and April of 2010, please contact technical support to determine if your drive is affected by this issue.  If it is affected, G-Technology will be happy to arrange a replacement of the unit.

Thank you for your continued support of G-Technology.


Print  Email  Save  Notify Me  Add to Favorites 
Article ID: 43 Article Created: 05-28-2010 12:16 PMLast Modified: 12-17-2010 11:32 AM

How well did this article answer your question? 100% 75% 50% 25% 0%

Related Articles
Does G-Technology provide software to back up my computer
We do not provide backup software. You could use one of the following solutions....
How do I create a RAID set with a G-SATA (and more)?
How to create a RAID set on Windows or OS X...
How do I make my G-Technology drive bootable ?
All hard drives can be made bootable if the following is taken in to consideration....
Connecting G-Drive Mini with Mac G5 Systems
G-Technology places a high value on the quality of our products and we want our customers to always expect that our products meet your expectations.  Recently, it has come to our attention ...

Most Recently Viewed Articles
I forgot my G-CONNECT Wireless Network Password
There may be certain situations in which you need to reset* the G-CONNECT device. Typically, this happens when you misplace or lose your Wireless Network SSID password....
How do I restore the look of my drive icon after I've formatted my G-Technology drive on the Mac?
 Follow these instructions to restore the look of your G-Technology drive icons after formatting on Mac....
How to Connect in USB Mode
First if you have already powered on the device, you will need to power it off by pressing the power button found on the device until the LED's begin flashing. When the LED's turn off, it is safe to disconnect the power adapter. Plug the two identical ends of the Y-Cable into your personal computer and the third into your G-CONNECT....
Using RAID Modes
This article contains instructions on how to use G-Technology RAID Configuration Utility....
I can’t access the GUI
 This article contains information for troubleshotting GUI access using your G-SPEED eS....
Will a PCMCIA / Cardbus adapter card power my G-Drive Mini or G-Raid Mini?
Most PCMCIA and Cardbus adapters PC 32/54 cards are not designed to POWER external devices....
Which RAID Set should I use?
Depending on your requirements, there are 5 different types of RAID configurations available that are outlined in this article....
External Drive Troubleshooting - Windows
Basic External Drive Troubleshooting steps for Windows. ...
External Drive Troubleshooting - Mac
Basic steps for troubleshooting your G-Technology external drive on the Mac...
On Windows 7/Vista I cannot see my drive in Computer
  ...