CompanyLogo
Search Advanced Search
Categories
General Questions (55)
Studio Series (23)
Evolution Series (28)
G-DRIVE Family (42)
G-RAID Family (52)
G-SPEED/G-SAFE Family (53)
G-CONNECT (53)
G-MINI (16)
G-SATA (15)
Search
Advanced Search
FAQs
Search our FAQ to find resolutions to common issues.
Connecting G-Drive Mini with Mac G5 Systems

G-Technology places a high value on the quality of our products and we want our customers to always expect that our products meet your expectations.  Recently, it has come to our attention that a limited amount of G-Drive Mini external hard drives may experience a problem when connected to some Mac G-5 systems through the Firewire port.  On select G-Drive Mini models, a capacitor on the Firewire bus may fail causing a popping noise and emit some smoke. The smoke is actually the dust from the capacitor that escapes the unit after it pops.  We have traced this problem down to a small batch of units built after January 1 and before April 30, 2010.  We understand it is very concerning to hear a pop and see the dust, however the hard drive and the PCB board are still fully functional and the G-Drive mini will continue to operate normally.  If you have experienced this problem or are concerned about your unit, please contact our technical support to determine if your drive is affected by this issue and how to get a replacement if needed.  If your drive has this issue, we will gladly arrange a replacelent at no charge to you.   Rest assured that we have corrected this problem, and all new G-Drive Mini built after April 30th, 2010 will not be affected by this issue.  Thank you for your continued support of G-Technolgy products.


Print  Email  Save  Notify Me  Add to Favorites 
Article ID: 42 Article Created: 05-28-2010 12:11 PMLast Modified: 07-22-2013 12:57 PM

How well did this article answer your question? 100% 75% 50% 25% 0%

Related Articles
Does G-Technology provide software to back up my computer
We do not provide backup software. You could use one of the following solutions....
How do I make my G-Technology drive bootable ?
All hard drives can be made bootable if the following is taken in to consideration....

Most Recently Viewed Articles
How to Connect as a Wireless Network Drive on Mac OSX
As a wireless drive you can access and mange your G-CONNECT and it's content via the G-CONNECT's wireless connection. Select your G-CONNECT wireless network (SSID) through your wireless network manager....
Adding Content to G-CONNECT
Once your G-CONNECT device is set up, you will be ready to transfer content onto it for your viewing pleasure. The device has been pre-loaded with the following category folders, which is the recommended way to organize your files when you add content....
Will a PCMCIA / Cardbus adapter card power my G-Drive Mini or G-Raid Mini?
Most PCMCIA and Cardbus adapters PC 32/54 cards are not designed to POWER external devices....
I want to use my G-Technology drive on BOTH Mac and Windows
All G-Technology drives are formatted for Mac Operating System. To use these drives on both Windows and Mac platforms, you have two options....
Can I use a portable battery pack to power my G-CONNECT?
 Yes, there are a variety of portable external battery products on the market that will not only power your tablets and smartphones, but also your G-CONNECT (Mophie, Hyperjuice)....
Formatting your drive for both Mac and Windows using ex-FAT
 This article contains information how to format your G-Technology hard drive for use with both Windows and Mac using the ex-FAT format....
How do I remove a Studio Series/G-RAID Drive Sled?
 Instructions on how to remove hard drive from drive sled....
What does RAID mean?
 RAID stands for Redundant Array of Independent Disks......
How to format/reformat your drive for Mac (HFS+)
 Follow these steps to format your drive for use on the Mac:...
Safely Ejecting Your G-Technology Drive
 How to properly eject your drive before disconnecting or powering off....