CompanyLogo
Search Advanced Search
Categories
General Questions (53)
Studio Series (20)
Evolution Series (27)
G-DRIVE Family (41)
G-RAID Family (51)
G-SPEED/G-SAFE Family (52)
G-CONNECT (53)
G-MINI (16)
G-SATA (15)
Search
Advanced Search
FAQs
Search our FAQ to find resolutions to common issues.
Installing a RAID controller for your G-SPEED eS

Installing a RAID controller for your G-SPEED eS

The G-SPEED eS requires a Host Bus Adapter (HBA) in your computer to provide eSATA capabilities. The card needs to be port-multiplication aware and installed in the proper PCI slot for proper performance. Lower performance cards are usually 2-port 1x cards, and the higher performance cards are generally 4-port 4x cards. To install the RAID controller, follow the instructions provided by your host adapter manufacturer.


Print  Email  Save  Notify Me  Add to Favorites 
Article ID: 146 Article Created: 07-30-2013 16:17 PMLast Modified: 07-30-2013 16:17 PM

How well did this article answer your question? 100% 75% 50% 25% 0%

Most Recently Viewed Articles
How many TB of storage will I have available using RAID 0/RAID 5 in my G-SPEED Q?
   ...
External Drive Troubleshooting - Mac
Basic steps for troubleshooting your G-Technology external drive on the Mac...
I'm using copper cables that causes the G-Speed to be inconsistent
If you're using copper cables with your G-Speed and are experiencing inconsistent mounting both G-Technology and ATTO recommend that you switch to Fiber Channel Cables for consistent performance....
What is the difference between the G-DRIVE and G-RAID?
   ...
What is the proper way to disconnect/unmount my G-Technology drive from my computer?
UNMOUNTING/DISCONNECTING G-Technology drives  A nice feature of many G-Technology drives is the ability to be connected and disconnected while your computer is running. ...
Can I use 3rd party hard drives in my GSafe/GSpeed units?
   ...
Formatting NTFS for Windows
 This article contains information on how to format your G-Technology Hard Drive in NTFS for use with Windows....
How many drives can I chain together using FW800?
  For best performance we recommend a chain of no longer than 5 drives. ...
Removing Drives From A Multi-bay Unit
This article contains a refrence guide on how to remove hard drives from your multi-bay G-Technology product....
Adding Content to G-CONNECT
Once your G-CONNECT device is set up, you will be ready to transfer content onto it for your viewing pleasure. The device has been pre-loaded with the following category folders, which is the recommended way to organize your files when you add content....