CompanyLogo
Search Advanced Search
Categories
General Questions (53)
Studio Series (20)
Evolution Series (27)
G-DRIVE Family (41)
G-RAID Family (51)
G-SPEED/G-SAFE Family (52)
G-CONNECT (53)
G-MINI (16)
G-SATA (15)
Search
Advanced Search
FAQs
Search our FAQ to find resolutions to common issues.
Setting up G-Speed eS Pro for Mac or Windows

Setting up G-Speed eS Pro for Mac or Windows

  1. Remove your G-Speed eS Pro from its packaging. G-Speed eS Pro requires a Mini-SAS RAID controller, which you will need to install in your computer prior to setup of your G-Speed eS Pro.( G-Technology recommends the ATTO ExpressSAS R680 x8 PCIe Mini-SAS RAID Controller)
  2. Connect your G-Speed eS Pro to your RAID controller using a Mini-SAS cable, and then connect the power cord.
  3. Power on the G-Speed eS Pro using the switch on the back of the unit. The Drive Module and Power LEDs will light up blue.
  4. Configure the RAID for your according to your RAID controller’s instructions. Once the RAID array is configured you will be able to format the unit with your operating system’s disk utilities.

 


Print  Email  Save  Notify Me  Add to Favorites 
Article ID: 143 Article Created: 07-30-2013 13:53 PMLast Modified: 07-30-2013 13:53 PM

How well did this article answer your question? 100% 75% 50% 25% 0%

Most Recently Viewed Articles
I recreated my raid using the web GUI but I don't see my hard drive on the desktop
  ...
How do I initialize G-RAID?
How to initialize G-RAID on Macintosh or Windows system....
The G-CONNECT device is not listed under Wireless Networks on my PC / Mac
Ensure that the G-CONNECT is powered on, and that you are within a sensible range of the G-CONNECT device. ...
How to Connect as a Wi-Fi Hotspot
To create a Wi-Fi Hotspot, plug in a network cable from your router to the G-CONNECT Ethernet port. Point your wireless devices, such as your personal computer or iPad, to the G-CONNECT wi-fi network....
What RAID settings does G-RAID ship in?
The G-RAID ships in a RAID 0 (Stripe) configuration allowing for increased performance....
External Drive Troubleshooting - Mac
Basic steps for troubleshooting your G-Technology external drive on the Mac...
Can I access my G-CONNECT and surf the web at home using my iPad on the same network at the same time?
The best way to surf the web and have wireless access to content stored on your G-CONNECT wireless storage solution is to connect the drive via Ethernet to your home LAN (router)....
I forgot my password, do I need to reset my G-CONNECT?
 If you have forgotten your password you can use the Password Hint to retrieve your password....
My G-Speed eS works with Mac OS X Tiger but not on Leapord
  ...
How to Connect in USB Mode
First if you have already powered on the device, you will need to power it off by pressing the power button found on the device until the LED's begin flashing. When the LED's turn off, it is safe to disconnect the power adapter. Plug the two identical ends of the Y-Cable into your personal computer and the third into your G-CONNECT....