CompanyLogo
Search Advanced Search
Categories
General Questions (55)
Studio Series (23)
Evolution Series (28)
G-DRIVE Family (42)
G-RAID Family (52)
G-SPEED/G-SAFE Family (53)
G-CONNECT (53)
G-MINI (16)
G-SATA (15)
Search
Advanced Search
FAQs
Search our FAQ to find resolutions to common issues.
On Windows I can't initialize my G-Technology hard drive. Disk Management says it is a "GPT Protective Partition."

G-Technology drives are formatted at the factory for Mac OS.  Changes to the Mac OS in 10.5 and above have caused an incompatibility with Windows OS, requiring the drive to be "cleaned" before being formatted.  This process is outlined below. 


Before starting this process remove all other external drives except the drive you want to erase/initialize. This does not include the start up drive.  

IMPORTANT NOTE: THIS PROCESS WILL ERASE ALL INFORMATION ON THE DISK SELECTED

 1) Open Disk Management by right clicking on "My Computer" and then clicking on "Manage."



2) Go to Disk Management and resize the window so you can view ALL the drives in the lower right section of Disk Management

3) IMPORTANT!!! Locate the Disk # next to the disk that indicates "GPT Protective Partition"  In the example below it is Disk 1.
Be sure to locate YOUR DISK # and DO NOT just choose Disk 1 because of the sample image below. It is only an example!!!



 

4) Open a Command window by clicking on the "START" menu and selcting "RUN"...

...then type "CMD" (without quotes) in the window that opens:


 
Click OK

5) In the Command window type"diskpart" and hit enter ENTER

6) Now type "select disk X" and  hit ENTER; (X = the disk number that is GPT Protected)  BE CERTAIN YOU HAVE SELECTED THE CORRECT DISK.

7) Now type "clean" and hit ENTER (this will start the process)

8) type "exit" ENTER (this will close the window)





9) Your G-DRIVE is now ready to be partitoned in the Windows Disk Manager.

 

To continue on to instructions on how to format your drive click here
 

 


Print  Email  Save  Notify Me  Add to Favorites 
Article ID: 13 Article Created: 08-06-2009 21:50 PMLast Modified: 07-31-2013 12:19 PM

How well did this article answer your question? 100% 75% 50% 25% 0%

Related Articles
I want to use my G-Technology drive on BOTH Mac and Windows
All G-Technology drives are formatted for Mac Operating System. To use these drives on both Windows and Mac platforms, you have two options....
My G-Technology drive does not show up on my Windows computer
Out of the box, all G-Technology drives are formatted for Mac Operating Systems. Depending on whether or not you will be using your G-Technology drive on both Mac/Windows or Windows only, you will need to reformat it for NTFS or ex-FAT. Click to read more....

Most Recently Viewed Articles
How many TB of storage will I have available using RAID 0/RAID 5 in my G-SPEED Q?
   ...
My drive was working; it powers up but I can’t seem to access it?
 Mac and Windows external drive troubleshooting....
G-CONNECT System Requirements and Box Contents
The G-CONNECT device has support for the following Operating Systems. The device is ready for use with Apple® Mac OS X® and Microsoft Windows® systems and comes formatted as FAT-32, which is ideal for cross-platform use....
I'm using copper cables that causes the G-Speed to be inconsistent
If you're using copper cables with your G-Speed and are experiencing inconsistent mounting both G-Technology and ATTO recommend that you switch to Fiber Channel Cables for consistent performance....
I forgot my password, do I need to reset my G-CONNECT?
 If you have forgotten your password you can use the Password Hint to retrieve your password....
How much video can I store on my G-Technology Drive?
It is dependent on the type of video footage you are working with. See the chart below for more information....
How to Connect in USB Mode
First if you have already powered on the device, you will need to power it off by pressing the power button found on the device until the LED's begin flashing. When the LED's turn off, it is safe to disconnect the power adapter. Plug the two identical ends of the Y-Cable into your personal computer and the third into your G-CONNECT....
External Drive Troubleshooting - Mac
Basic steps for troubleshooting your G-Technology external drive on the Mac...
How many Thunderbolt devices can I attach?
One of the great features with Thunderbolt technology is the ability to daisy-chain up to 6 high-performance devices. Please note that only 2 display devices can be used within the 6 Thunderbolt device daisy chain. Additionally, any device with only one Thunderbolt port must be the last device in the daisy-chain....
When trying to access my drive I get the "Spinning beach ball" on the MAC or the "Spinning hourglass" on the PC
 ...