CompanyLogo
Search Advanced Search
Categories
General Questions (55)
Studio Series (23)
Evolution Series (28)
G-DRIVE Family (42)
G-RAID Family (52)
G-SPEED/G-SAFE Family (53)
G-CONNECT (53)
G-MINI (16)
G-SATA (15)
Search
Advanced Search
FAQs
Search our FAQ to find resolutions to common issues.
How to Connect as a Wireless Network Drive on Windows 7

How to Connect as a Wireless Network Drive on Windows 7

As a wireless drive you can access and mange your G-CONNECT and it's content via the G-CONNECT's wireless connection. Select your G-CONNECT wireless network (SSID) through your wireless network manager.

  1. Connect to the G-CONNECT over Wi-Fi
  2. Open Computer and click on Map network drive:

  3. You will be prompted to enter a server to connect to. Enter the same address you would use to connect through the web application: \\172.16.0.1\admin

  4. After clicking Finish you will be prompted to log into the server. Enter the same login information you would use when connecting to the iPad, iPhone or Web Application.

  5. After clicking ok the drive will appear in Computer as a drive.

    You can then transfer files to the G-CONNECT just as you would any files on your computer.


Print  Email  Save  Notify Me  Add to Favorites 
Article ID: 102 Article Created: 07-22-2013 14:56 PMLast Modified: 07-22-2013 14:56 PM

How well did this article answer your question? 100% 75% 50% 25% 0%

Most Recently Viewed Articles
Quick Setup for G-Technology Products
    ...
What does RAID mean?
 RAID stands for Redundant Array of Independent Disks......
How do I change the RAID settings on my G-RAID Studio(MAC)?
 Instructions on installing and changing the RAID settings for the G-RAID Studio....
External Drive Troubleshooting - Mac
Basic steps for troubleshooting your G-Technology external drive on the Mac...
How to copy files to your G-Technology external hard drive
 Copying files over to the g-technology external hard drive in both Windows and Mac....
Safely Ejecting Your G-Technology Drive
 How to properly eject your drive before disconnecting or powering off....
Replace a Failed Drive Module/Rebuilding RAID 5 for G-SPEED Q
  ...
Will my Thunderbolt 1 devices work with Thunderbolt 2?
Yes, the Thunderbolt 2 uses the same connectors, thus the Thunderbolt 1 device will work, but the Thunderbolt 2 port will perform at Thunderbolt 1 speeds (10Gbps) ...
Which RAID Set should I use?
Depending on your requirements, there are 5 different types of RAID configurations available that are outlined in this article....
How do I change the RAID settings on my G-RAID Gen 7 Removable (MAC)?
 Step by step instructions on changing the RAID settings on your Mac....