CompanyLogo
Search Advanced Search
Categories
General Questions (55)
Studio Series (23)
Evolution Series (28)
G-DRIVE Family (42)
G-RAID Family (52)
G-SPEED/G-SAFE Family (53)
G-CONNECT (53)
G-MINI (16)
G-SATA (15)
Search
Advanced Search
FAQs
Search our FAQ to find resolutions to common issues.
How to Connect as a Wireless Network Drive on Mac OSX

How to Connect as a Wireless Network Drive on Mac OSX

As a wireless drive you can access and mange your G-CONNECT and it's content via the G-CONNECT's wireless connection. Select your G-CONNECT wireless network (SSID) through your wireless network manager.

  1. Connect to the G-CONNECT over Wi-Fi
  2. Open Finder and you will see G-CONNECT listed under SHARED in the left pane.

  3. Select G-CONNECT from the list and click Connect As...

  4. Enter the G-CONNECT Username (Admin or Guest) and Password just as you would when trying to sign into the device through the iPad, iPhone or Web Application and click Connect.

    Now that the G-CONNECT appears on your Mac Desktop, you can transfer files to and from the device like any directly attached drive.


Print  Email  Save  Notify Me  Add to Favorites 
Article ID: 101 Article Created: 07-22-2013 14:50 PMLast Modified: 07-22-2013 14:50 PM

How well did this article answer your question? 100% 75% 50% 25% 0%

Most Recently Viewed Articles
On Windows I can't initialize my G-Technology hard drive. Disk Management says it is a "GPT Protective Partition."
On a Windows system drives show up as a "GPT protective partition" and are unable to be formatted. REASON: G-Technology drives are formatted at the factory for Mac OS.  Changes to the Mac OS in 10.5 and above have caused an incompatibility with Windows OS, requiring the drive to be "cleaned" before being formatted.  The process to "clean" the drive outlined in this article. ...
External Drive Troubleshooting - Windows
Basic External Drive Troubleshooting steps for Windows. ...
How do I setup my drive for use as a Time Machine backup?
In most cases when a new drive is connected to the system Time Machine will prompt you for the setup. If this does not   happen or if you are... ...
Safely Ejecting Your G-Technology Drive
 How to properly eject your drive before disconnecting or powering off....
How do I know what drive I have data on if both drives show up the same on my desktop?
When utilizing the G-DOCK ev with Thunderbolt in a JBOD configuration, G-Technology recommends that you change the name of the device in the operating system and label each drive independently with the included drive labels....
External Drive Troubleshooting - Mac
Basic steps for troubleshooting your G-Technology external drive on the Mac...
Is Thunderbolt backward compatible with USB and FireWire?
Third party vendors will sell adapters that will allow you to connect USB and FireWire devices to Thunderbolt ports. However, you will still be limited to the performance of their built-in components. For example, a FireWire 800 device still will not be able to transfer data than 800Mbps....
How do I make my G-Technology drive bootable ?
All hard drives can be made bootable if the following is taken in to consideration....
Can I use 3rd party hard drives in my GSafe/GSpeed units?
   ...
How do I change the RAID settings on my G-RAID Studio(Windows)?
 Step by step instructions on changing the RAID settings on my G-RAID Studio for Windows....