CompanyLogo
Search Advanced Search
Categories
General Questions (55)
Studio Series (23)
Evolution Series (28)
G-DRIVE Family (42)
G-RAID Family (52)
G-SPEED/G-SAFE Family (53)
G-CONNECT (53)
G-MINI (16)
G-SATA (15)
Search
Advanced Search
FAQs
Search our FAQ to find resolutions to common issues.
Automatic Software Updates

Automatic Software Updates

The G-CONNECT automatic update feature keeps your G-CONNECT up-to-date with the latest software. Follow the steps below to make sure your G-CONNECT is current.

Plug your G-CONNECT into your home router using an Ethernet cable. The automatic update feature requires an Internet connection. Power on your G-CONNECT and it will automatically check and install any required updates. The Status and Wi-Fi LED's will flash as the device is updating. Once complete the 'Status' LED will stop flashing and your G-CONNECT will be ready for use.


Print  Email  Save  Notify Me  Add to Favorites 
Article ID: 92 Article Created: 07-22-2013 13:54 PMLast Modified: 07-22-2013 14:07 PM

How well did this article answer your question? 100% 75% 50% 25% 0%

Most Recently Viewed Articles
How many drives can I chain together using FW800?
  For best performance we recommend a chain of no longer than 5 drives. ...
How do I setup my G-Technology drive for use with Time Machine?
G-Technology drives are designed to be compatible with the Apple Time Machine software....
How do I setup my drive for use as a Time Machine backup?
In most cases when a new drive is connected to the system Time Machine will prompt you for the setup. If this does not   happen or if you are... ...
Playing and Viewing Content
There are a variety of ways to play and View your content. The following methods highlight some of the recommended ways to view your content while travelling, at home, in the office or just on the go....
G-Technology Power Supply Specifications
    ...
External Drive Troubleshooting - Mac
Basic steps for troubleshooting your G-Technology external drive on the Mac...
Drive is not recognized in Windows
What to do if your external g-technology drive is not recognized by Windows....
How to set up a RAID 0?
To create a RAID 0 set, open the Disk Utility program. This application is located on your hard drive under Applications/Utilities/Disk Utility....
How to Connect in USB Mode
First if you have already powered on the device, you will need to power it off by pressing the power button found on the device until the LED's begin flashing. When the LED's turn off, it is safe to disconnect the power adapter. Plug the two identical ends of the Y-Cable into your personal computer and the third into your G-CONNECT....
On Windows 7/Vista I cannot see my drive in Computer
  ...