CompanyLogo
Search Advanced Search
Categories
General Questions (53)
Studio Series (20)
Evolution Series (27)
G-DRIVE Family (41)
G-RAID Family (51)
G-SPEED/G-SAFE Family (52)
G-CONNECT (53)
G-MINI (16)
G-SATA (15)
Search
Advanced Search
FAQs
Search our FAQ to find resolutions to common issues.
G-CONNECT Hardware Specifications

G-CONNECT Hardware Specifications

Product Features & Diagram
The following diagram will help you become familiar with your new G-CONNECT device.

  1. Power Button

    Press the Power button on the device to turn the G-CONNECT 'On' or 'Off'. The Power/HDD light will begin to flash as the Wi-Fi light and Status light will blink when the device is turned on. The Power/HDD light will blink periodically through your work session.

    When turning the device 'Off' you will see the Power/HDD light brighten and then the Status light will blink rapidly, followed by all lights shutting off.

  2. Wi-Fi Button

    The Wi-Fi button is used to enable/disable Wi-Fi and to the device.

    In the case that you need to perform a factory reset on your G-CONNECT press and hold this button until the LED's on the front of the device begins to oscillate.

  3. Power Port

    Connect the device to the power adapter to enable wireless access.

  4. USB Port

    On the rear of the device is a USB 2.0 port and Ethernet port. Use the USB port when you mount the device on a laptop or desktop computer.

  5. Ethernet Port

    Use the Ethernet port to connect G-CONNECT to your local Internet router, and use the device as a private Wi-Fi hotspot for wireless devices.


Print  Email  Save  Notify Me  Delete from Favorites 
Article ID: 91 Article Created: 07-22-2013 13:52 PMLast Modified: 07-22-2013 14:07 PM

How well did this article answer your question? 100% 75% 50% 25% 0%

Most Recently Viewed Articles
On Windows I can't initialize my G-Technology hard drive. Disk Management says it is a "GPT Protective Partition."
On a Windows system drives show up as a "GPT protective partition" and are unable to be formatted. REASON: G-Technology drives are formatted at the factory for Mac OS.  Changes to the Mac OS in 10.5 and above have caused an incompatibility with Windows OS, requiring the drive to be "cleaned" before being formatted.  The process to "clean" the drive outlined in this article. ...
Are there any other ways to access the content on the G-CONNECT with my iOS device?
The G–CONNECT supports a variety of interface protocols that allow you to access, view and play content directly from the G–CONNECT....
I recreated my raid using the web GUI but I don't see my hard drive on the desktop
  ...
Can I daisy chain Thunderbolt 2 and Thunderbolt 1 devices?
Yes, but if you would do that, make sure that the Thunderbolt 1 devices are placed after the Thunderbolt 2 devices. If a Thunderbolt 2 device would be daisy chained after a Thunderbolt 1 device, it will operate at Thunderbolt 1 speeds.  ...
How to format your drive to use with Windows 8
 Steps to format your drive to use with Windows 8...
How to format/reformat your drive for Mac (HFS+)
 Follow these steps to format your drive for use on the Mac:...
My G-Speed eS works with Mac OS X Tiger but not on Leapord
  ...
Is it okay to leave my external drive turned on all the time?
   ...
Formatting your drive for both Mac and Windows using ex-FAT
 This article contains information how to format your G-Technology hard drive for use with both Windows and Mac using the ex-FAT format....
How do I restore the look of my drive icon after I've formatted my G-Technology drive on the Mac?
 Follow these instructions to restore the look of your G-Technology drive icons after formatting on Mac....