CompanyLogo
Search Advanced Search
Categories
General Questions (55)
Studio Series (23)
Evolution Series (28)
G-DRIVE Family (42)
G-RAID Family (52)
G-SPEED/G-SAFE Family (53)
G-CONNECT (53)
G-MINI (16)
G-SATA (15)
Search
Advanced Search
FAQs
Search our FAQ to find resolutions to common issues.
Safely Ejecting Your G-Technology Drive

Safely Ejecting Your G-Technology Drive

When you are done using your G-Technology external hard drive, and would like to power it off or disconnect the drive from your computer, you will need to properly eject it. This is essential, as disconnecting or powering off a drive without safely ejecting it first can potentially cause data loss or even damage to the drive.

For Mac OS X:

  1. Locate the drive to be ejected on the Desktop
  2. Click and drag the drive to the Trash on the Dock, the Trash icon will change to an Eject icon
  3. Release the drive over the Trash/Eject icon and the drive will disappear from the Desktop, and will be ready to be powered off or disconnected.
  4. Alternatively, you may also click the Eject icon next to the drive label in Finder, the drive will disappear from the list and will be ready to be powered off or disconnected.

 

 

For Windows:

  1. Show the hidden icons on your Taskbar by left-clicking the arrow icon  
  2. Find the "Safely Remove Hardware and Eject Media" icon  
  3. Left-click the icon and a context menu will list any drives that are available to be ejected.
  4. Left-click the drive to be ejected, in the example above it is a G-Drive Mobile, the drive will ejected and you will receive a confirmation message that it is safe to disconnect the drive.

 


Print  Email  Save  Notify Me  Delete from Favorites 
Article ID: 89 Article Created: 07-11-2013 18:37 PMLast Modified: 05-20-2014 18:37 PM

How well did this article answer your question? 100% 75% 50% 25% 0%

Most Recently Viewed Articles
How to Connect in USB Mode
First if you have already powered on the device, you will need to power it off by pressing the power button found on the device until the LED's begin flashing. When the LED's turn off, it is safe to disconnect the power adapter. Plug the two identical ends of the Y-Cable into your personal computer and the third into your G-CONNECT....
Formatting your drive for both Mac and Windows using ex-FAT
 This article contains information how to format your G-Technology hard drive for use with both Windows and Mac using the ex-FAT format....
How do I rebuild the RAID 1 setting if the status is degraded?
  ...
Using the RAID function within Mac OS for your G-RAID Thunderbolt
 ...
Do I have to keep my computer on while the RAID is building/rebuilding?
The G-SPEED eS does require that you keep your computer running while the RAIDset is building/rebuilding....
I want to use my G-Technology drive on BOTH Mac and Windows
All G-Technology drives are formatted for Mac Operating System. To use these drives on both Windows and Mac platforms, you have two options....
How to Connect as a Network Drive over Ethernet (Mac OS® & Windows®)
With the G‑CONNECT connected via Ethernet to your home Wi-Fi router you can mount G‑CONNECT as a network attached drive on your network to enjoy your existing Wi-Fi as well as have access to your digital content on the drive....
Is Thunderbolt backward compatible with USB and FireWire?
Third party vendors will sell adapters that will allow you to connect USB and FireWire devices to Thunderbolt ports. However, you will still be limited to the performance of their built-in components. For example, a FireWire 800 device still will not be able to transfer data than 800Mbps....
Which RAID Set should I use?
Depending on your requirements, there are 5 different types of RAID configurations available that are outlined in this article....
Is the G-RAID Studio “hot swappable’?
  ...