CompanyLogo
Search Advanced Search
Categories
General Questions (55)
Studio Series (23)
Evolution Series (28)
G-DRIVE Family (42)
G-RAID Family (52)
G-SPEED/G-SAFE Family (53)
G-CONNECT (53)
G-MINI (16)
G-SATA (15)
Search
Advanced Search
FAQs
Search our FAQ to find resolutions to common issues.
How do I change the RAID settings on my G-RAID mini?

WARNING:  Following these steps will erase all data on your drive. Backup any content before proceeding.

 

To change the RAID setting on your G-RAID mini you will need the G-RAID mini RAID Configurator. You can download it for Mac or Windows at the link below.

http://g-technology.com/support/g-raid-mini-raid-configurator

On Mac the RAID configurator can be used with any version of OSX. Only one G-Technology device should be plugged in when running the program. Using the RAID configurator will erase all data from the drive, so it is best to avoid possible confusion as to which device is being selected.

  1. Download and open G-Tech_Configurator_MAC_081910.dmg.zip
  2. Double click on G-Tech_Configurator_MAC_081910.dmg.zip and G-Tech Configurator-0810.dmg will be created in the downloads folder.
  3. Double click on G-Tech Configurator-0810.dmg and the G-Tech Configurator icon will appear on your desktop.

 

  1. Double click G-Technology Configurator icon and then double click G-Tech Configurator in the window.

 

  1. If you receive an Application warning, click Open.

 

  1. After a loading screen the G-Technology RAID Configuration Utility screen will appear. Click Continue if you are ready to configure your drive.

  1. A detection screen will show while your devices are being scanned.

  1. On the configuration screen select the RAID setting you want to apply and click configure. RAID 0 allows access to the full capacity of the drive and gives highest performance. RAID 1 gives access to half the capacity and creates a Mirror backup of all data copied to the drive.

 

  1. Click Yes on the warning screen if you are ready to proceed. All data on the drive will be erased once OK is clicked.

 

  1. This screen will appear while the configuration is proceeding.

  1. If a prompt appears stating the the disk has been ejected, click OK.

 

  1. When the process is complete you will receive a notice of success. Click Exit.

  1. The drive will appear on your desktop and you will be prompted to initialize the disk. For instructions on formatting/initializing the drive please refer to the link below under “How do I format my drive for use with Mac?”

http://www.g-technology.com/kbase/users/kb.php?id=57&category_id=5

 

 

 

In Windows the current version of the configurator is only compatible with WinXP 32bit. Once the drive has been configured it can be used with Vista/Win7, but the configuration cannot be done on those operating systems. Only one G-Technology device should be plugged in when running the program. Using the configurator will erase all data from the drive, so it is best to avoid possible confusion as to which device is being selected.

 

Windows Instructions:

  1. Download and open G-Tech_Configurator_PC_v1.0.zip
  2. Double click on G-Tech_Configurator_PC_v1.0.exe
  3. If you are prompted to run or extract, select Run.

 

  1. If a second prompt appears, select Run on that as well.

 

  1. After a loading screen the G-Tech RAID Configuration Utility screen will appear. Click Continue if you are ready to configure your drive.

 

  1. A detection screen will show while your devices are being scanned.

 

  1. On the configuration screen select the RAID setting you want to apply and click configure. RAID 0 allows access to the full capacity of the drive and gives highest performance. RAID 1 gives access to half the capacity and creates a Mirror backup of all data copied to the drive.

 

  1. Click OK on the warning screen if you are ready to proceed. All data on the drive will be erased once OK is clicked.

 

  1. This screen will appear while the configuration is proceeding.

 

  1. When the process is complete you will receive a notice of success. Click exit.

 

  1. The drive will now need to be Partitioned and Formatted through Disk Management. Instructions can be found at the link below under “How to format my drive for Windows only (NTFS)?”

http://www.g-technology.com/kbase/users/kb.php?id=59&category_id=5


Print  Email  Save  Notify Me  Add to Favorites 
Article ID: 64 Article Created: 06-02-2011 09:32 AMLast Modified: 07-31-2013 14:07 PM

How well did this article answer your question? 100% 75% 50% 25% 0%

Most Recently Viewed Articles
Unable to play home recorded movie's
Most video cameras capture video in specific encoding live AVCHD and may require some processing / editing. ...
Drive is not recognized in Windows
What to do if your external g-technology drive is not recognized by Windows....
How to find the g-technology drive on your computer
How to find the g-technology drive on Windows and Mac computers. ...
How to Connect as a Wireless Network Drive on Mac OSX
As a wireless drive you can access and mange your G-CONNECT and it's content via the G-CONNECT's wireless connection. Select your G-CONNECT wireless network (SSID) through your wireless network manager....
External Drive Troubleshooting - Mac
Basic steps for troubleshooting your G-Technology external drive on the Mac...
How do I restore the look of my drive icon after I've formatted my G-Technology drive on the Mac?
 Follow these instructions to restore the look of your G-Technology drive icons after formatting on Mac....
How much video can I store on my G-Technology Drive?
It is dependent on the type of video footage you are working with. See the chart below for more information....
Formatting your drive for both Mac and Windows using ex-FAT
 This article contains information how to format your G-Technology hard drive for use with both Windows and Mac using the ex-FAT format....
Can the G-CONNECT play DRM protected content I've purchased in the iTunes store?
G-CONNECT can easily store DRM protected content. Your iPad, iPhone or Computer must be authorized to play this content and it is responsible for decrypting and the playback of protected content such as iTunes movies and TV Shows....
G-SPEED Q LED Visual Notifications
 View this article to determine what the LED colors on your G-SPEED Q mean....