CompanyLogo
Search Advanced Search
Categories
General Questions (41)
G-CONNECT (53)
G-DRIVE ev (6)
G-DRIVE ev PLUS (6)
G-DOCK ev with Thunderbolt (15)
G-DRIVE (21)
G-DRIVE mini (25)
G-DRIVE mobile (18)
G-DRIVE mobile USB (17)
G-DRIVE slim (17)
G-MINI (16)
G-RAID (26)
G-RAID (legacy) (22)
G-RAID mini (25)
G-RAID Thunderbolt (15)
G-SATA (15)
G-SAFE (19)
G-SPEED (24)
G-SPEED Q (25)
G-SPEED eS PRO (21)
G-SPEED eS (33)
G-SPEED FC (16)
G-SPEED FC XL (20)
XL 12 (14)
XL 16 (14)
Search
Advanced Search
FAQs
Search our FAQ to find resolutions to common issues.
How do I change the RAID settings on my G-RAID mini?

WARNING:  Following these steps will erase all data on your drive. Backup any content before proceeding.

 

To change the RAID setting on your G-RAID mini you will need the G-RAID mini RAID Configurator. You can download it for Mac or Windows at the link below.

http://g-technology.com/support/g-raid-mini-raid-configurator

On Mac the RAID configurator can be used with any version of OSX. Only one G-Technology device should be plugged in when running the program. Using the RAID configurator will erase all data from the drive, so it is best to avoid possible confusion as to which device is being selected.

  1. Download and open G-Tech_Configurator_MAC_081910.dmg.zip
  2. Double click on G-Tech_Configurator_MAC_081910.dmg.zip and G-Tech Configurator-0810.dmg will be created in the downloads folder.
  3. Double click on G-Tech Configurator-0810.dmg and the G-Tech Configurator icon will appear on your desktop.

 

  1. Double click G-Technology Configurator icon and then double click G-Tech Configurator in the window.

 

  1. If you receive an Application warning, click Open.

 

  1. After a loading screen the G-Technology RAID Configuration Utility screen will appear. Click Continue if you are ready to configure your drive.

  1. A detection screen will show while your devices are being scanned.

  1. On the configuration screen select the RAID setting you want to apply and click configure. RAID 0 allows access to the full capacity of the drive and gives highest performance. RAID 1 gives access to half the capacity and creates a Mirror backup of all data copied to the drive.

 

  1. Click Yes on the warning screen if you are ready to proceed. All data on the drive will be erased once OK is clicked.

 

  1. This screen will appear while the configuration is proceeding.

  1. If a prompt appears stating the the disk has been ejected, click OK.

 

  1. When the process is complete you will receive a notice of success. Click Exit.

  1. The drive will appear on your desktop and you will be prompted to initialize the disk. For instructions on formatting/initializing the drive please refer to the link below under “How do I format my drive for use with Mac?”

http://www.g-technology.com/kbase/users/kb.php?id=57&category_id=5

 

 

 

In Windows the current version of the configurator is only compatible with WinXP 32bit. Once the drive has been configured it can be used with Vista/Win7, but the configuration cannot be done on those operating systems. Only one G-Technology device should be plugged in when running the program. Using the configurator will erase all data from the drive, so it is best to avoid possible confusion as to which device is being selected.

 

Windows Instructions:

  1. Download and open G-Tech_Configurator_PC_v1.0.zip
  2. Double click on G-Tech_Configurator_PC_v1.0.exe
  3. If you are prompted to run or extract, select Run.

 

  1. If a second prompt appears, select Run on that as well.

 

  1. After a loading screen the G-Tech RAID Configuration Utility screen will appear. Click Continue if you are ready to configure your drive.

 

  1. A detection screen will show while your devices are being scanned.

 

  1. On the configuration screen select the RAID setting you want to apply and click configure. RAID 0 allows access to the full capacity of the drive and gives highest performance. RAID 1 gives access to half the capacity and creates a Mirror backup of all data copied to the drive.

 

  1. Click OK on the warning screen if you are ready to proceed. All data on the drive will be erased once OK is clicked.

 

  1. This screen will appear while the configuration is proceeding.

 

  1. When the process is complete you will receive a notice of success. Click exit.

 

  1. The drive will now need to be Partitioned and Formatted through Disk Management. Instructions can be found at the link below under “How to format my drive for Windows only (NTFS)?”

http://www.g-technology.com/kbase/users/kb.php?id=59&category_id=5


Print  Email  Save  Notify Me  Add to Favorites 
Article ID: 64 Article Created: 06-02-2011 09:32 AMLast Modified: 07-31-2013 14:07 PM

How well did this article answer your question? 100% 75% 50% 25% 0%

Most Recently Viewed Articles
Formatting and Partitioning the G-CONNECT
The G-CONNECT comes pre-formatted FAT32 for cross functional platforms, Windows OS and Mac OS. G-Technology highly recommends leaving the G-CONNECT as FAT32....
What RAID controller is recommend by G-Technology?
 The RAID controller recommended for use with the G-SPEED eS is our High-Performance 4-port card. For more details, view this article....
How do I setup my G-Technology drive for use with Time Machine?
G-Technology drives are designed to be compatible with the Apple Time Machine software....
Can I use any USB cable with my G-Technology Drive?
 We recommend using only the included USB cable with your drive....
How do I know what drive I have data on if both drives show up the same on my desktop?
When utilizing the G-DOCK ev with Thunderbolt in a JBOD configuration, G-Technology recommends that you change the name of the device in the operating system and label each drive independently with the included drive labels....
How do I setup my drive for use as a Time Machine backup?
In most cases when a new drive is connected to the system Time Machine will prompt you for the setup. If this does not   happen or if you are... ...
How do I initialize G-RAID?
How to initialize G-RAID on Macintosh or Windows system....
External Drive Troubleshooting - Mac
Basic steps for troubleshooting your G-Technology external drive on the Mac...
How to find the g-technology drive on your computer
How to find the g-technology drive on Windows and Mac computers. ...
Will a PCMCIA / Cardbus adapter card power my G-Drive Mini or G-Raid Mini?
Most PCMCIA and Cardbus adapters PC 32/54 cards are not designed to POWER external devices....