Search Advanced Search
General Questions (55)
Studio Series (23)
Evolution Series (40)
G-DRIVE Family (42)
G-RAID Family (52)
G-SPEED/G-SAFE Family (53)
G-MINI (16)
G-SATA (14)
Advanced Search
Search our FAQ to find resolutions to common issues.
How do I rebuild the RAID 1 setting if the status is degraded?

To rebuild the RAID 1 setting, you will have to run the G-RAID Studio Configurator. If you are in a degraded status the Rebuild button will be enabled.  Please ensure that you select the drive that has the RAID 1 content that you would like to mirror to the other drive. Warning: Selecting the incorrect drive may mirror the incorrect data. Once you have verified that, click on the Rebuild button.


Print  Email  Save  Notify Me  Add to Favorites 
Article ID: 190 Article Created: 05-22-2014 17:41 PMLast Modified: 05-22-2014 17:41 PM

How well did this article answer your question? 100% 75% 50% 25% 0%

Most Recently Viewed Articles
G-CONNECT System Requirements and Box Contents
The G-CONNECT device has support for the following Operating Systems. The device is ready for use with Apple® Mac OS X® and Microsoft Windows® systems and comes formatted as FAT-32, which is ideal for cross-platform use....
External Drive Troubleshooting - Mac
Basic steps for troubleshooting your G-Technology external drive on the Mac...
External Hard Drive Encryption For Windows using BitLocker
 Steps to encrypt an external hard drive....
On Windows I can't initialize my G-Technology hard drive. Disk Management says it is a "GPT Protective Partition."
On a Windows system drives show up as a "GPT protective partition" and are unable to be formatted. REASON: G-Technology drives are formatted at the factory for Mac OS.  Changes to the Mac OS in 10.5 and above have caused an incompatibility with Windows OS, requiring the drive to be "cleaned" before being formatted.  The process to "clean" the drive outlined in this article. ...
External Drive Troubleshooting - Windows
Basic External Drive Troubleshooting steps for Windows. ...
Formatting your drive for both Mac and Windows using ex-FAT
 This article contains information how to format your G-Technology hard drive for use with both Windows and Mac using the ex-FAT format....
Quick Setup for G-Technology Products
Adding Content to G-CONNECT
Once your G-CONNECT device is set up, you will be ready to transfer content onto it for your viewing pleasure. The device has been pre-loaded with the following category folders, which is the recommended way to organize your files when you add content....
How to Connect in USB Mode
First if you have already powered on the device, you will need to power it off by pressing the power button found on the device until the LED's begin flashing. When the LED's turn off, it is safe to disconnect the power adapter. Plug the two identical ends of the Y-Cable into your personal computer and the third into your G-CONNECT....
How do I change the RAID settings on my G-SPEED Studio R?
 Step by step instructions on how to change the RAID settings....