CompanyLogo
Search Advanced Search
Categories
General Questions (41)
G-CONNECT (53)
G-DRIVE ev (6)
G-DRIVE ev PLUS (6)
G-DOCK ev with Thunderbolt (15)
G-DRIVE (21)
G-DRIVE mini (25)
G-DRIVE mobile (18)
G-DRIVE mobile USB (17)
G-DRIVE slim (17)
G-MINI (16)
G-RAID (26)
G-RAID (legacy) (22)
G-RAID mini (25)
G-RAID Thunderbolt (15)
G-SATA (15)
G-SAFE (19)
G-SPEED (24)
G-SPEED Q (25)
G-SPEED eS PRO (21)
G-SPEED eS (33)
G-SPEED FC (16)
G-SPEED FC XL (20)
XL 12 (14)
XL 16 (14)
Search
Advanced Search
FAQs
Search our FAQ to find resolutions to common issues.
Install the Highpoint RocketRAID Controller

Install the Highpoint RocketRAID Controller

Highpoint RocketRAID ExpressSAS Host Adapters contain components that are sensitive to electrostatic discharge (ESD). Please follow standard methods to avoid ESD.

  1. For maximum performance install the Highpoint RocketRAID controller in your MacPro in SLOT 2 (x16 slot closest to video card) .
  2. Secure the RAID controller in place.

NOTE:If you are using a video capture card such as the AJA Kona™ or Blackmagic Decklink™ , follow their recommendations for slot usage.

Attach G-SPEED eS Pro to the Controller

  1. Attach one end of the supplied mini-SAS cable to the mini-SAS port on the back of G-SPEED eS Pro.
  2. Attach the other end of the mini-SAS cable to Port A (left most port) on the Highpoint RocketRAID controller.
  3. Attach the power cord to the back of G-SPEED eS Pro and connect the other end to AC power.
  4. Power on the G-SPEED eS Pro then power on the system. G-SPEED eS Pro will mount on the desktop.

G-SPEED eS Pro is shipped from the factory setup in RAID 0 mode for best performance. The Highpoint RocketRAID controller also supports RAID 1, 5, 6 and JBOD modes. If you would like to change the RAID mode, refer to the G-SPEED eS Pro User Manual or the Highpoint RocketRAID Controller documenta¬tion for more information on changing RAID modes.


Print  Email  Save  Notify Me  Delete from Favorites 
Article ID: 151 Article Created: 07-30-2013 16:28 PMLast Modified: 08-01-2013 19:20 PM

How well did this article answer your question? 100% 75% 50% 25% 0%

Most Recently Viewed Articles
Formatting NTFS for Windows
 This article contains information on how to format your G-Technology Hard Drive in NTFS for use with Windows....
Removing Drives From A Multi-bay Unit
This article contains a refrence guide on how to remove hard drives from your multi-bay G-Technology product....
I forgot my G-CONNECT Wireless Network Password
There may be certain situations in which you need to reset* the G-CONNECT device. Typically, this happens when you misplace or lose your Wireless Network SSID password....
How do I setup my drive for use as a Time Machine backup?
In most cases when a new drive is connected to the system Time Machine will prompt you for the setup. If this does not   happen or if you are... ...
How much video can I store on my G-Technology Drive?
It is dependent on the type of video footage you are working with. See the chart below for more information....
Difficulties transferring files 30GB or greater with the G-DRIVE and G-SPEED
G-Technology places a high value on the quality of our products and we want our customers to always expect that our products meet your expectations.  Recently, it has come to our attention ...
On Windows 7/Vista I cannot see my drive in Computer
  ...
Can I use 3rd party hard drives in my GSafe/GSpeed units?
   ...
How to find the g-technology drive on your computer
How to find the g-technology drive on Windows and Mac computers. ...
External Drive Troubleshooting - Windows
Basic External Drive Troubleshooting steps for Windows. ...