CompanyLogo
Search Advanced Search
Categories
General Questions (55)
Studio Series (23)
Evolution Series (28)
G-DRIVE Family (42)
G-RAID Family (52)
G-SPEED/G-SAFE Family (53)
G-CONNECT (53)
G-MINI (16)
G-SATA (15)
Search
Advanced Search
FAQs
Search our FAQ to find resolutions to common issues.
How to Connect as a Wireless Network Drive on Windows 7

How to Connect as a Wireless Network Drive on Windows 7

As a wireless drive you can access and mange your G-CONNECT and it's content via the G-CONNECT's wireless connection. Select your G-CONNECT wireless network (SSID) through your wireless network manager.

  1. Connect to the G-CONNECT over Wi-Fi
  2. Open Computer and click on Map network drive:

  3. You will be prompted to enter a server to connect to. Enter the same address you would use to connect through the web application: \\172.16.0.1\admin

  4. After clicking Finish you will be prompted to log into the server. Enter the same login information you would use when connecting to the iPad, iPhone or Web Application.

  5. After clicking ok the drive will appear in Computer as a drive.

    You can then transfer files to the G-CONNECT just as you would any files on your computer.


Print  Email  Save  Notify Me  Delete from Favorites 
Article ID: 102 Article Created: 07-22-2013 14:56 PMLast Modified: 07-22-2013 14:56 PM

How well did this article answer your question? 100% 75% 50% 25% 0%

Most Recently Viewed Articles
My G-Technology drive is spinning down after a period of time
This is often due to the operating system putting the drives to sleep. If you do not want the drives to spin down, you will need to turn off the sleep settings in your associated operating system. ...
Quick Setup for G-Technology Products
    ...
How many devices can I daisy chain with Thunderbolt 2?
Similar to Thunderbolt 1, Thunderbolt 2 will still support for up to 6 peripherals and will still continue to support USB and FireWire via their respective adapters.  ...
Which RAID Set should I use?
Depending on your requirements, there are 5 different types of RAID configurations available that are outlined in this article....
Formatting NTFS for Windows
 This article contains information on how to format your G-Technology Hard Drive in NTFS for use with Windows....
Can I daisy chain Thunderbolt 2 and Thunderbolt 1 devices?
Yes, but if you would do that, make sure that the Thunderbolt 1 devices are placed after the Thunderbolt 2 devices. If a Thunderbolt 2 device would be daisy chained after a Thunderbolt 1 device, it will operate at Thunderbolt 1 speeds.  ...
How to format/reformat your drive for Mac (HFS+)
 Follow these steps to format your drive for use on the Mac:...
Using the RAID function within Mac OS for your G-RAID Thunderbolt
 ...
What RAID settings does G-RAID ship in?
The G-RAID ships in a RAID 0 (Stripe) configuration allowing for increased performance....
What is Thunderbolt?
Thunderbolt in an input/output hardware interface, developed by Intel in cooperation with Apple, which allows for external devices to be connected to a computer. Thunderbolt combines PCI Express and DisplayPort, as well as a DC connector for power, in a single connection, passing through a single Thunderbolt cable. You can daisy chain up to 6 peripherals, like storage devices and monitors. You can also connect USB and FireWire devices to the Thunderbolt port, provided that you have the proper adapter, but the speed you will get will still be USB or FireWire speeds, depending on what device you are connecting.  ...